Поиск по VIN, марке, модели, типу техники или названию агрегата, по артикулу любого масла:
Масло для Volvo - Articulated frame tractors, A/T - A30F (6x6)
Volvo Articulated frame tractors, A/T A30F (6x6), год выпуска с 2011 - Моторное масло, акпп, трансмиссионное масло, антифриз, тормозная жидкость, жидкость гур (гидроусилителя) и другие жидкости.
Топливо: Дизельное топливо
Привод: на все колеса
Двигатель: Однорядный
Количество цилиндров: 6
Клапанов на цилиндров: 4
Рабочий объем: 10800 куб. см.
Мощность: 360 л.с. / 266 кВт
Узлы и агрегаты
Двигатель Volvo D11H Stage IIIB/Tier 4i
Для дизелей
RAVENOL UDT Ultra Duty Truck SAE 10W-30 sintetik yuqori legirlangan, past kul tarkibli (Low SAPS) engil oqadigan motor moyi. Yuk mashinalarining yuqori yuklanadigan dizel dvigatellari uchun yil davomida ishlatish uchun maxsus ishlab chiqilgan. EURO 2, EURO 3, EURO 4, EURO 5 va EURO 6 sinfidagi turbodizel dvigatellari uchun, tarkibida 500 ppm gacha oltingugurt bo‘lgan dizel yoqilg‘isi bilan ishlatish uchun mo‘ljallangan.
Одобрено производителем:
DTFR 15C110, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5
Соответствие требованиям:
Caterpillar ECF-3, Cummins CES 20081, DAF PSQL 2.1E LD, DDC 93K218, Deutz DQC IV-18 LA, MB 228.51, MTU Type 3.1
- Доступная фасовка
- Параметры продукта
Объем:
20 L, ecobox
Артикул:
1121110-B20
Объем:
60 L
Артикул:
1121110-060
Объем:
60 L, bosilgan barrel
Артикул:
1121110-D60
Объем:
208 L, bosilgan barrel
Артикул:
1121110-D28
RAVENOL UDT Ultra Duty Truck SAE 10W-30 sintetik yuqori legirlangan, past kul tarkibli (Low SAPS) engil oqadigan motor moyi. Yuk mashinalarining yuqori yuklanadigan dizel dvigatellari uchun yil davomida ishlatish uchun maxsus ishlab chiqilgan. EURO 2, EURO 3, EURO 4, EURO 5 va EURO 6 sinfidagi turbodizel dvigatellari uchun, tarkibida 500 ppm gacha oltingugurt bo‘lgan dizel yoqilg‘isi bilan ishlatish uchun mo‘ljallangan.
Bu yuk mashinalari va "Tier4" yo‘ltanlamas avtomobillar uchun SHPD (Super High Performance Diesel) sinfidagi motor moyi hisoblanadi. Dvigatelda qattiq zarrachalar filtri va katalizator bor yoki yo‘qligidan qat’i nazar, Low SAPS texnologiyasi asosida ishlab chiqilgan – kul, fosfor va oltingugurtning past miqdorini o‘z ichiga oladi.
Oksidlanish va kesishga yuqori chidamliligi tufayli zamonaviy API CK-4 standartining talablarini bajarish uchun ajoyib havo ajratish xususiyatiga ega.
Past atrof-muhit haroratida mukammal "sovuq" ishga tushirishni ta’minlaydi, yuqori ish haroratida esa ajoyib moylash qobiliyatiga ega. Ishqalanishning past darajasi va kam eskirish.
RAVENOL UDT Ultra Duty Truck SAE 10W-30 birinchi Yevropa motor moyi bo‘lib, API CK-4 va API CJ-4 litsenziyasiga ega.
Yangi API CK-4 spetsifikatsiyasi eski spetsifikatsiyalarni almashtiradi, shuningdek, tarkibida 500 ppm gacha oltingugurt bo‘lgan dizel yoqilg‘isida ishlaydigan dvigatellarga tegishlidir.
RAVENOL UDT Ultra Duty Truck SAE 10W-30 barcha fasllar uchun mo‘ljallangan motor moyi bo‘lib, zamonaviy chiqindi gaz emissiya talablariga javob beradi. Avtomobil ishlab chiqaruvchisi talablariga muvofiq moy almashtirish oralig‘i uzaytirilgan.
EURO 2, EURO 3, EURO 4, EURO 5 va EURO 6 sinfidagi aralash avtopark uchun tavsiya etiladi. Dvigatel ishlab chiqaruvchisining moy tanlash bo‘yicha tavsiyalariga rioya qiling.
UDT Ultra Duty Truck SAE 10W-30 qo‘llanilishi quyidagilarni ta’minlaydi:
- Barqaror qovushqoqlik xususiyatlari va kesishga chidamlilik
- Har qanday ish rejimida yoqilg‘i tejash
- Chiqindi gaz emissiyasini uzoq vaqt davomida nazorat qilish
- Quvvat yo‘qotilishini kamaytirish
- Past ko‘piklanish va moyning kam sarfi
- Moy almashtirish oralig‘ining uzayishi
- Sovuq ishga tushirishda mukammal xususiyatlar
- Low SAPS = sulfatli kul, fosfor va oltingugurtning past miqdori
- Qattiq zarrachalar filtri bo‘lmagan avtomobillarda ham qo‘llanilishi
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | Caterpillar ECF-3, Cummins CES 20081, DAF PSQL 2.1E LD, Detroit Diesel DDC 93K218, Deutz DQC IV-18 LA, MB 228.51, MTU Typ 3.1 |
Caterpillar ECF-3, Cummins CES 20081, DAF PSQL 2.1E LD, Detroit Diesel DDC 93K218, Deutz DQC IV-18 LA, MB 228.51, MTU Typ 3.1
|
||
| Viskozite | 10W-30 |
10W-30
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Sintetik |
Sintetik
|
||
| API | CI-4, CJ-4, CK-4, SN |
CI-4, CJ-4, CK-4, SN
|
||
| ACEA | E11, E6, E7, E8, E9 |
E11, E6, E7, E8, E9
|
||
| Ishlab chiqaruvchi tomonidan ma’qullangan | DTFR 15C110, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5 |
DTFR 15C110, Mack EOS-4.5, Renault RLD-3, Volvo VDS-4.5
|
||
| Talablarga mos keladi | Caterpillar ECF-3, Cummins CES 20081, DAF PSQL 2.1E LD, DDC 93K218, Deutz DQC IV-18 LA, MB 228.51, MTU Type 3.1 |
Caterpillar ECF-3, Cummins CES 20081, DAF PSQL 2.1E LD, DDC 93K218, Deutz DQC IV-18 LA, MB 228.51, MTU Type 3.1
|
||
| Zichlik 20°С da | g/cm³ | 859 | EN ISO 12185 |
859
g/cm³
EN ISO 12185
|
| Rang | Jigarrang | ingl |
Jigarrang
ingl
|
|
| Viskozite 100°С da | mm²/s | 12.2 | DIN 51562-1 |
12.2
mm²/s
DIN 51562-1
|
| Viskozite 40°С da | mm²/s | 81.5 | DIN 51562-1 |
81.5
mm²/s
DIN 51562-1
|
| Viskozite indeksi VI | 145 | DIN ISO 2909 |
145
DIN ISO 2909
|
|
| Past haroratli viskozite (ССС) -25°C da | mPa*s | 5300 | ASTM D5293 |
5300
mPa*s
ASTM D5293
|
| Qotish harorati | °C | -39 | DIN ISO 3016 |
-39
°C
DIN ISO 3016
|
| NOACK bug‘lanishi | % | 9.1 | ASTM D5800 |
9.1
%
ASTM D5800
|
| Yong‘in chiqish harorati | °C | 240 | DIN EN ISO 2592 |
240
°C
DIN EN ISO 2592
|
| Ishqoriy son | mgKOH/g | 10.6 | ASTM D2896 |
10.6
mgKOH/g
ASTM D2896
|
| Sulfatli kul miqdori | %wt. | 0.94 | DIN 51575 |
0.94
%wt.
DIN 51575
|
| Ruxsatnomalar | Caterpillar ECF-3, Cummins CES 20081, DAF PSQL 2.1E LD, DDC 93K218, Deutz DQC IV-18 LA, DTFR 15C110, Mack EOS-4.5, MB 228.51, MTU Type 3.1, Renault RLD-3, Volvo VDS-4.5 |
Caterpillar ECF-3, Cummins CES 20081, DAF PSQL 2.1E LD, DDC 93K218, Deutz DQC IV-18 LA, DTFR 15C110, Mack EOS-4.5, MB 228.51, MTU Type 3.1, Renault RLD-3, Volvo VDS-4.5
|
Для дизелей
RAVENOL Ultra Synthetik Truck SAE 5W-30 - sintetik, yuqori darajada legirlangan, past kul tarkibiga ega (Low SAPS) motor moyi. Yuqori yuklanishga ega turbo dizel dvigatellari uchun yil davomida foydalanish uchun maxsus ishlab chiqilgan. EURO 4, EURO 5 va EURO 6 sinfidagi turbo dizel dvigatellari uchun past oltingugurtli dizel yoqilg‘isi bilan ishlashga mo‘ljallangan.
Одобрено производителем:
Caterpillar ECF-3, Deutz DQC IV-18 LA, DTFR 15C100, DTFR 15C110, DTFR 15C120, Mack EOS-4.5, MAN M 3677, MTU Type 3.1, Renault RLD-3, Scania LDF-4, Volvo VDS-4.5
Соответствие требованиям:
Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, Deutz TTCD-Motors, DTFR 13D110 (MB 235.28), Ford WSS-M2C 213-A1, IVECO 18-1804 TLS E6, Liebherr LH-00-ENG LA, MAN M 3271-1, MAN M 3297-1, MAN M 3477, MAN M 3575, MAN M 3691, MAN M 3777, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, Scania Low Ash, Voith Retarder B, Volvo CNG
- Доступная фасовка
- Параметры продукта
Объем:
20 L, ecobox
Артикул:
1121102-B20
Объем:
60 L
Артикул:
1121102-060
Объем:
208 L, bosilgan barrel
Артикул:
1121102-D28
Объем:
1 000 L
Артикул:
1121102-700
RAVENOL Ultra Synthetik Truck SAE 5W-30 - sintetik, yuqori darajada legirlangan, past kul tarkibiga ega (Low SAPS) motor moyi. Yuqori yuklanishga ega turbo dizel dvigatellari uchun yil davomida foydalanish uchun maxsus ishlab chiqilgan. EURO 4, EURO 5 va EURO 6 sinfidagi turbo dizel dvigatellari uchun past oltingugurtli dizel yoqilg‘isi bilan ishlashga mo‘ljallangan.
RAVENOL Ultra Synthetik Truck SAE 5W-30 chig‘anoq filtri va katalizator bilan jihozlangan yoki jihozlanmagan dvigatellarda ishlatish uchun mos keladi.
SAE 5W-30 yopishqoqlik diapazoni past atrof-muhit haroratida ishonchli "sovuq" ishga tushirishni va yuqori ish haroratida mukammal moylashni ta’minlaydi. Ishqalanish va eskirishni kamaytiradi.
RAVENOL Ultra Synthetik Truck SAE 5W-30 SHPD (Super High Performance Diesel) sinfidagi motor moyi bo‘lib, chig‘anoq filtri va katalizator bilan jihozlangan yoki jihozlanmagan dvigatellarda qo‘llash uchun mo‘ljallangan. Ushbu moy Low SAPS texnologiyasi asosida ishlab chiqilgan bo‘lib, past kul, fosfor va oltingugurt miqdoriga ega.
Qo‘llash sohasi:
RAVENOL Ultra Synthetik Truck SAE 5W-30 har mavsumda ishlatiladigan motor moyi bo‘lib, zamonaviy chiqindi gaz emissiyasi talablariga javob beradi.
RAVENOL Ultra Synthetik Truck SAE 5W-30 – turbo quvvatlantirish tizimiga ega yoki ega bo‘lmagan dizel dvigatellari uchun universal, yil davomida foydalanish mumkin bo‘lgan motor moyidir. EURO 4, EURO 5 va EURO 6 sinfidagi dvigatellar uchun qo‘llaniladi.
Klassifikatsiya va spetsifikatsiyalar:
Spetsifikatsiyalar: API CJ-4/SN, ACEA E4, E6, E7, E9
Ruxsatnomalar: SCANIA LDF-4, MACK EO-O PREMIUM PLUS, MAN M 3677, MAN M 3477, MAN M 3575, MAN M 3271-1, MB-FREIGABE 228.31, MB-FREIGABE 228.51, RENAULT VI RLD-3, VOLVO VDS-4
Talablarga javob beradi: CATERPILLAR ECF-3, MB 235.28, MTU TYP 3.1, MTU TYP 2.1, DEUTZ DQC IV-10 LA, CUMMINS CES 20081, MAN 3691, MAN 3297-1, JASO DH-2, VOLVO CNG, DAF, VOITH RETARDER B, SCANIA LOWASH
Afzalliklari va xususiyatlari:
RAVENOL Ultra Synthetik Truck SAE 5W-30 motor moyi quyidagi afzalliklarni ta’minlaydi:
- Yuqori darajadagi eskirishdan himoya
- Yuqori oksidlanishga chidamlilik
- Yuqori haroratlarga nisbatan mukammal barqarorlik
- Ajoyib yuvuvchi va dispersiyalovchi xususiyatlar
- Yonilg‘i sarfini kamaytirish hisobiga iqtisodiy tejamkorlik
- Yuqori oksidlanish qarshiligi tufayli uzoq xizmat muddati
- Sovuq ishga tushirishda mukammal xususiyatlar va past haroratlarda dvigatel qismlarining tez yog‘lanishi
- Yaxshi yopishqoqlik-harorat xususiyatlari
- PAO va gidrokraking asosidagi bazaviy moy tarkibidan foydalanish natijasida past bug‘lanish yo‘qotishlari hisobiga moy sarfining kamayishi.
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E LD, Detroit Diesel DDC 93K222, Deutz TTCD Motors, DTFR 13D110 (MB 235.28), Ford WSS-M2C213 A1, IVECO 18-1804 TLS E6, JASO DH-2, Liebherr LH-00-ENG LA, MAN 3297-1, MAN 3691, MAN M 3271-1, MAN M 3477, MAN M 3575, MAN M 3777, MB 228.31, MB 228.51, MB 235.28, MTU Typ 2.1, Scania LowAsh, Voith Retarder B, VOLVO CNG |
Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E LD, Detroit Diesel DDC 93K222, Deutz TTCD Motors, DTFR 13D110 (MB 235.28), Ford WSS-M2C213 A1, IVECO 18-1804 TLS E6, JASO DH-2, Liebherr LH-00-ENG LA, MAN 3297-1, MAN 3691, MAN M 3271-1, MAN M 3477, MAN M 3575, MAN M 3777, MB 228.31, MB 228.51, MB 235.28, MTU Typ 2.1, Scania LowAsh, Voith Retarder B, VOLVO CNG
|
||
| Viskozite | 5W-30 |
5W-30
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Sintetik |
Sintetik
|
||
| API | CJ-4, CK-4, SN |
CJ-4, CK-4, SN
|
||
| ACEA | E11, E4, E6, E7, E8, E9 |
E11, E4, E6, E7, E8, E9
|
||
| JASO | DH-2 |
DH-2
|
||
| Ishlab chiqaruvchi tomonidan ma’qullangan | Caterpillar ECF-3, Deutz DQC IV-18 LA, DTFR 15C100, DTFR 15C110, DTFR 15C120, Mack EOS-4.5, MAN M 3677, MTU Type 3.1, Renault RLD-3, Scania LDF-4, Volvo VDS-4.5 |
Caterpillar ECF-3, Deutz DQC IV-18 LA, DTFR 15C100, DTFR 15C110, DTFR 15C120, Mack EOS-4.5, MAN M 3677, MTU Type 3.1, Renault RLD-3, Scania LDF-4, Volvo VDS-4.5
|
||
| Talablarga mos keladi | Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, Deutz TTCD-Motors, DTFR 13D110 (MB 235.28), Ford WSS-M2C 213-A1, IVECO 18-1804 TLS E6, Liebherr LH-00-ENG LA, MAN M 3271-1, MAN M 3297-1, MAN M 3477, MAN M 3575, MAN M 3691, MAN M 3777, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, Scania Low Ash, Voith Retarder B, Volvo CNG |
Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, Deutz TTCD-Motors, DTFR 13D110 (MB 235.28), Ford WSS-M2C 213-A1, IVECO 18-1804 TLS E6, Liebherr LH-00-ENG LA, MAN M 3271-1, MAN M 3297-1, MAN M 3477, MAN M 3575, MAN M 3691, MAN M 3777, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, Scania Low Ash, Voith Retarder B, Volvo CNG
|
||
| Zichlik 20°С da | g/cm³ | 852 | EN ISO 12185 |
852
g/cm³
EN ISO 12185
|
| Rang | Jigarrang | ingl |
Jigarrang
ingl
|
|
| Viskozite 100°С da | mm²/s | 12.2 | DIN 51562-1 |
12.2
mm²/s
DIN 51562-1
|
| Viskozite 40°С da | mm²/s | 73.6 | DIN 51562-1 |
73.6
mm²/s
DIN 51562-1
|
| Viskozite indeksi VI | 164 | DIN ISO 2909 |
164
DIN ISO 2909
|
|
| Past haroratli viskozite (CCS) -30°C da | mPa*s | 5900 | ASTM D5293 |
5900
mPa*s
ASTM D5293
|
| Past haroratda nasoslanish viskozitesi (MRV) -35°C da | mPa*s | 21.500 | ASTM D4684 |
21.500
mPa*s
ASTM D4684
|
| Qotish harorati | °C | -45 | DIN ISO 3016 |
-45
°C
DIN ISO 3016
|
| NOACK bug‘lanishi | % | 11.8 | ASTM D5800 |
11.8
%
ASTM D5800
|
| Yong‘in chiqish harorati | °C | 232 | DIN EN ISO 2592 |
232
°C
DIN EN ISO 2592
|
| Ishqoriy son | mgKOH/g | 13.9 | ASTM D2896 |
13.9
mgKOH/g
ASTM D2896
|
| Sulfatli kul miqdori | %wt. | 0.97 | DIN 51575 |
0.97
%wt.
DIN 51575
|
| Ruxsatnomalar | Caterpillar ECF-3, Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, Deutz DQC IV-18 LA, Deutz TTCD-Motors, DTFR 13D110 (MB 235.28), DTFR 15C100, DTFR 15C110, DTFR 15C120, Ford WSS-M2C 213-A1, IVECO 18-1804 TLS E6, Liebherr LH-00-ENG LA, Mack EOS-4.5, MAN M 3271-1, MAN M 3297-1, MAN M 3477, MAN M 3575, MAN M 3677, MAN M 3691, MAN M 3777, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, MTU Type 3.1, Renault RLD-3, Scania LDF-4, Scania Low Ash, Voith Retarder B, Volvo CNG, Volvo VDS-4.5 |
Caterpillar ECF-3, Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E LD, DDC 93K222, Deutz DQC IV-18 LA, Deutz TTCD-Motors, DTFR 13D110 (MB 235.28), DTFR 15C100, DTFR 15C110, DTFR 15C120, Ford WSS-M2C 213-A1, IVECO 18-1804 TLS E6, Liebherr LH-00-ENG LA, Mack EOS-4.5, MAN M 3271-1, MAN M 3297-1, MAN M 3477, MAN M 3575, MAN M 3677, MAN M 3691, MAN M 3777, MB 228.31, MB 228.51, MB 235.28, MTU Type 2.1, MTU Type 3.1, Renault RLD-3, Scania LDF-4, Scania Low Ash, Voith Retarder B, Volvo CNG, Volvo VDS-4.5
|
Гидравлическая система
Для гидравлики
RAVENOL Hydraulikoel TSX 46 (HVLP) – HVLP toifasiga kiruvchi mineral gidravlik moy. Yuqori darajada tozalangan bazaviy moy va maxsus qo‘shimchalar kompleksidan foydalanilishi natijasida barqaror yopishqoqlik indeksi, eskirish va korroziyaga qarshi ishonchli himoya, shuningdek muhrlovchi materiallarga nisbatan neytral munosabat ta’minlanadi.
Соответствие требованиям:
AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump
- Доступная фасовка
- Параметры продукта
Объем:
5 L
Артикул:
1323205-005
Объем:
10 L
Артикул:
1323205-010
Объем:
20 L, ecobox
Артикул:
1323205-B20
Объем:
60 L
Артикул:
1323205-060
Объем:
208 L, bosilgan barrel
Артикул:
1323205-D28
Объем:
1 000 L
Артикул:
1323205-700
RAVENOL Hydraulikoel TSX 46 (HVLP) – HVLP toifasiga kiruvchi mineral gidravlik moy. Yuqori darajada tozalangan bazaviy moy va maxsus qo‘shimchalar kompleksidan foydalanilishi natijasida barqaror yopishqoqlik indeksi, eskirish va korroziyaga qarshi ishonchli himoya, shuningdek muhrlovchi materiallarga nisbatan neytral munosabat ta’minlanadi.
RAVENOL Hydraulikoel TSX 46 (HVLP) gidravlik moylari og‘ir ish sharoitida ishlovchi qurilish va kon texnikasi gidravlik tizimlarida qo‘llaniladi, jumladan yuqori tezlikdagi va yuqori bosimli lapatkali, tishli va axial-porshenli nasoslar. Kumush yoki kumush bilan qoplangan detallar mavjud bo‘lgan gidravlik tizimlarda qo‘llash mumkin emas.
Qo‘llash Hydraulikol TSX 46 quyidagilarni ta’minlaydi:
- Doimiy yuqori yopishqoqlik indeksi
- Eskirishdan mukammal himoya
- Korroziyaga qarshi a’lo darajadagi himoya
- Ko‘piklanishga qarshi himoya
- Plastmassali muhrlarga nisbatan neytral munosabat
- Past qotish harorati
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | AFNOR 48-603 HV, CETOP RP 91H HV, Cincinnati Milacron P-68 (HM-32), Cincinnati Milacron P-69 (HM-68), Cincinnati Milacron P-70 (HM-46), FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, US Steel 127, US Steel 136, Vickers Vane Pump |
AFNOR 48-603 HV, CETOP RP 91H HV, Cincinnati Milacron P-68 (HM-32), Cincinnati Milacron P-69 (HM-68), Cincinnati Milacron P-70 (HM-46), FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, US Steel 127, US Steel 136, Vickers Vane Pump
|
||
| Viskozite | 46 |
46
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Mineral |
Mineral
|
||
| Talablarga mos keladi | AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump |
AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51524-3, ISO 6743-4 HV |
DIN 51524-3, ISO 6743-4 HV
|
||
| Zichlik 20°С da | g/cm³ | 855 | EN ISO 12185 |
855
g/cm³
EN ISO 12185
|
| Rang | Sariq | ingl |
Sariq
ingl
|
|
| Viskozite 100°С da | mm²/s | 7.9 | DIN 51562-1 |
7.9
mm²/s
DIN 51562-1
|
| Viskozite 40°С da | mm²/s | 45 | DIN 51562-1 |
45
mm²/s
DIN 51562-1
|
| Viskozite indeksi VI | 148 | DIN ISO 2909 |
148
DIN ISO 2909
|
|
| Qotish harorati | °C | -42 | DIN ISO 3016 |
-42
°C
DIN ISO 3016
|
| Yong‘in chiqish harorati | °C | 232 | DIN EN ISO 2592 |
232
°C
DIN EN ISO 2592
|
| Ruxsatnomalar | AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, DIN 51524-3, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, ISO 6743-4 HV, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump |
AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, DIN 51524-3, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, ISO 6743-4 HV, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump
|
Для гидравлики
RAVENOL Hydraulikoel TSX 68 (HVLP) – HVLP toifasiga kiruvchi mineral gidravlik moy. Yuqori darajada tozalangan bazaviy moy va maxsus qo‘shimchalar kompleksidan foydalanilishi natijasida barqaror yopishqoqlik indeksi, eskirish va korroziyaga qarshi ishonchli himoya, shuningdek muhrlovchi materiallarga nisbatan neytral munosabat ta’minlanadi.
Одобрено производителем:
LOVAT LOV-204
Соответствие требованиям:
AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump
SAE: 68
Аналоги OEM:
Volvo 11708322, Volvo 11708323, Volvo VOE11708322, Volvo VOE11708323, Volvo VOE11708323
- Доступная фасовка
- Параметры продукта
Объем:
20 L, ecobox
Артикул:
1323206-B20
Объем:
60 L
Артикул:
1323206-060
Объем:
208 L
Артикул:
1323206-208
Объем:
1 000 L
Артикул:
1323206-700
RAVENOL Hydraulikoel TSX 68 (HVLP) – HVLP toifasiga kiruvchi mineral gidravlik moy. Yuqori darajada tozalangan bazaviy moy va maxsus qo‘shimchalar kompleksidan foydalanilishi natijasida barqaror yopishqoqlik indeksi, eskirish va korroziyaga qarshi ishonchli himoya, shuningdek muhrlovchi materiallarga nisbatan neytral munosabat ta’minlanadi.
Qo‘llanish:
RAVENOL Hydraulikoel TSX 68 (HVLP) gidravlik moylari qurilish va kon texnikasi gidravlik tizimlarida qo‘llaniladi, jumladan yuqori tezlikdagi va yuqori bosimli lapatkali, tishli va axial-porshenli nasoslar.
Kumush yoki kumush bilan qoplangan detallar mavjud bo‘lgan gidravlik tizimlarda qo‘llash mumkin emas.
Spetsifikatsiyalar:
RAVENOL Hydraulikoel TSX 68 (HVLP) quyidagi spetsifikatsiyalarga javob beradi:
Spetsifikatsiyalar: DIN 51524, ISO 6743-4-HV, Teil 3 HVLP
Tavsiya etiladi: AFNOR 48-603 HV, CETOP RP 91H HV, Cincinnati Milacron P-68 (HM-32), Cincinnati Milacron P-69 (HM-68), Cincinnati Milacron P-70 (HM-46), FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, US Steel 127, US Steel 136, Vickers Vane Pump
Afzalliklari va xususiyatlari:
- barqaror yuqori yopishqoqlik indeksi
- eskirishdan mukammal himoya
- korroziyaga qarshi himoya
- ko‘piklanishni oldini olish uchun a’lo havo va suv ajratish xususiyatlari
- rezina muhrlarga nisbatan neytral munosabat
- past qotish harorati
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | AFNOR 48-603 HV, CETOP RP 91H HV, Cincinnati Milacron P-68 (HM-32), Cincinnati Milacron P-69 (HM-68), Cincinnati Milacron P-70 (HM-46), FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, US Steel 127, US Steel 136, Vickers Vane Pump |
AFNOR 48-603 HV, CETOP RP 91H HV, Cincinnati Milacron P-68 (HM-32), Cincinnati Milacron P-69 (HM-68), Cincinnati Milacron P-70 (HM-46), FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, US Steel 127, US Steel 136, Vickers Vane Pump
|
||
| Viskozite | 68 |
68
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Mineral |
Mineral
|
||
| Ishlab chiqaruvchi tomonidan ma’qullangan | LOVAT LOV-204 |
LOVAT LOV-204
|
||
| Talablarga mos keladi | AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump |
AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51524, DIN 51524-3, ISO 6743-4 HV |
DIN 51524, DIN 51524-3, ISO 6743-4 HV
|
||
| Zichlik 20°С da | g/cm³ | 862 | EN ISO 12185 |
862
g/cm³
EN ISO 12185
|
| Rang | Sariq-jigarrang | ingl |
Sariq-jigarrang
ingl
|
|
| Viskozite 100°С da | mm²/s | 11.4 | DIN 51562-1 |
11.4
mm²/s
DIN 51562-1
|
| Viskozite 40°С da | mm²/s | 68.5 | DIN 51562-1 |
68.5
mm²/s
DIN 51562-1
|
| Viskozite indeksi VI | 161 | DIN ISO 2909 |
161
DIN ISO 2909
|
|
| Qotish harorati | °C | -35 | DIN ISO 3016 |
-35
°C
DIN ISO 3016
|
| Yong‘in chiqish harorati | °C | 242 | DIN EN ISO 2592 |
242
°C
DIN EN ISO 2592
|
| Ishqoriy son | mgKOH/g | 0.4 | ASTM D2896 |
0.4
mgKOH/g
ASTM D2896
|
| Sulfatli kul miqdori | %wt. | 0.06 | DIN 51575 |
0.06
%wt.
DIN 51575
|
| Ruxsatnomalar | AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, DIN 51524, DIN 51524-3, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, ISO 6743-4 HV, LOVAT LOV-204, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump |
AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, DIN 51524, DIN 51524-3, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, ISO 6743-4 HV, LOVAT LOV-204, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump
|
