Поиск по VIN, марке, модели, типу техники или названию агрегата, по артикулу любого масла:
Масло для Doosan - Forklifts, liquefied petroleum gas/gasoline, G/GC/GX - GC35S-5 (GM G643(E))
Doosan Forklifts, liquefied petroleum gas/gasoline, G/GC/GX GC35S-5 (GM G643(E)), год выпуска с 2007 - Моторное масло, акпп, трансмиссионное масло, антифриз, тормозная жидкость, жидкость гур (гидроусилителя) и другие жидкости.
Двигатель GM 4.3L V6
- Доступная фасовка
- Параметры продукта
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| SAE | 0W-30 |
0W-30
|
||
| Type | Full synthetic |
Full synthetic
|
Для смешанного парка
RAVENOL Turbo Plus SHPD 10W-30 – SHPD toifasiga mansub aralash avtopark uchun mo‘ljallangan motor moyi. Dizel va benzin dvigatellari, shu jumladan turbokompressorli dvigatellar uchun ishlatilishi mumkin. Kengaytirilgan almashtirish intervalini ta’minlaydi (avtomobil ishlab chiqaruvchisi ko‘rsatmalariga muvofiq).
Соответствие требованиям:
Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, Deutz DQC III-10, DTFR 15B110 (MB 228.3), Global DHD-1, Mack EO-N, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Renault RLD, Renault RLD-2, Volvo VDS-3
SAE: 10W-30
Аналоги OEM:
Caterpillar 3E9844, Caterpillar 143465, Hino HRLIE10W30C, Hyundai Motor 0520000100, Hyundai Motor 0520000400, Hyundai Motor 0520000600, Hyundai XTeer 1011014, Hyundai XTeer 1061002, Nissan KLB2M10302, Nissan KLBFA10301, Nissan KLBFA10302, Nissan KLBFA10302, Nissan KLBFO10301, Nissan KLBFO10302, Nissan KLBFO10304, Nissan KLBH010302
- Доступная фасовка
- Параметры продукта
Объем:
1 L
Артикул:
1123105-001
Объем:
5 L
Артикул:
1123105-005
Объем:
20 L, ecobox
Артикул:
1123105-B20
Объем:
1 000 L
Артикул:
1123105-700
RAVENOL Turbo Plus SHPD 10W-30 – SHPD toifasiga mansub aralash avtopark uchun mo‘ljallangan motor moyi. Dizel va benzin dvigatellari, shu jumladan turbokompressorli dvigatellar uchun ishlatilishi mumkin. Kengaytirilgan almashtirish intervalini ta’minlaydi (avtomobil ishlab chiqaruvchisi ko‘rsatmalariga muvofiq).
RAVENOL Turbo Plus SHPD 10W-30 qo‘llanilishi quyidagi afzalliklarni ta’minlaydi:
- Yuqori kesish kuchiga chidamlilik
- A’lo darajadagi oksidlanishga chidamlilik
- Ajoyib yopishqoqlik-harorat xususiyatlari
- Zo‘r tozalovchi va dispersiyalovchi xususiyatlar
- Yarim quruq moylash sharoitida yuqori mustahkamlik zaxirasi
- Yaxshi ishga tushirish xususiyatlari
- Qatron hosil bo‘lishining oldini olish
- Katalizatorlar bilan maksimal moslik
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF, Detroit Diesel DDC 93K215, Deutz DQC III-10, DTFR 15B110 (MB 228.3), Global DHD-1, JASO DH-1, Mack EO-N, MAN M 3275-1, MB 228.3, MTU Typ 2, MTU Typ 3, Renault RLD, Renault VI RLD-2, VOLVO VDS-3 |
Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DAF, Detroit Diesel DDC 93K215, Deutz DQC III-10, DTFR 15B110 (MB 228.3), Global DHD-1, JASO DH-1, Mack EO-N, MAN M 3275-1, MB 228.3, MTU Typ 2, MTU Typ 3, Renault RLD, Renault VI RLD-2, VOLVO VDS-3
|
||
| Viskozite | 10W-30 |
10W-30
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Mineral |
Mineral
|
||
| API | CI-4, SL |
CI-4, SL
|
||
| ACEA | A3, B4, E3, E5, E7 |
A3, B4, E3, E5, E7
|
||
| JASO | DH-1 |
DH-1
|
||
| Talablarga mos keladi | Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, Deutz DQC III-10, DTFR 15B110 (MB 228.3), Global DHD-1, Mack EO-N, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Renault RLD, Renault RLD-2, Volvo VDS-3 |
Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, Deutz DQC III-10, DTFR 15B110 (MB 228.3), Global DHD-1, Mack EO-N, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Renault RLD, Renault RLD-2, Volvo VDS-3
|
||
| Mos keladi | DAF, YaMZ |
DAF, YaMZ
|
||
| Zichlik 20°С da | g/cm³ | 865 | EN ISO 12185 |
865
g/cm³
EN ISO 12185
|
| Rang | Sariq-jigarrang | ingl |
Sariq-jigarrang
ingl
|
|
| Viskozite 100°С da | mm²/s | 12 | DIN 51562-1 |
12
mm²/s
DIN 51562-1
|
| Viskozite 40°С da | mm²/s | 74.9 | DIN 51562-1 |
74.9
mm²/s
DIN 51562-1
|
| Viskozite indeksi VI | 156 | DIN ISO 2909 |
156
DIN ISO 2909
|
|
| Qotish harorati | °C | -42 | DIN ISO 3016 |
-42
°C
DIN ISO 3016
|
| Yong‘in chiqish harorati | °C | 232 | DIN EN ISO 2592 |
232
°C
DIN EN ISO 2592
|
| Ishqoriy son | mgKOH/g | 10.2 | ASTM D2896 |
10.2
mgKOH/g
ASTM D2896
|
| Sulfatli kul miqdori | %wt. | 1.4 | DIN 51575 |
1.4
%wt.
DIN 51575
|
| Ruxsatnomalar | Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, Deutz DQC III-10, DTFR 15B110 (MB 228.3), Global DHD-1, Mack EO-N, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Renault RLD, Renault RLD-2, Volvo VDS-3 |
Caterpillar ECF-2, Caterpillar TO-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, DDC 93K215, Deutz DQC III-10, DTFR 15B110 (MB 228.3), Global DHD-1, Mack EO-N, MAN M 3275-1, MB 228.3, MTU Type 2, MTU Type 3, Renault RLD, Renault RLD-2, Volvo VDS-3
|
Коробка передач Powershift
Для АКПП
RAVENOL ATF DEXRON III H – bu avtomatik uzatma qutilari uchun mo‘ljallangan sintetik ATF moyi bo‘lib, Dexron III H turidagi transmissiya suyuqligini qo‘llash talab etilgan hollarda ishlatiladi.Gidrokraking asosidagi baza moyi va maxsus qo‘shimchalar majmuasi asosida ishlab chiqilgan bo‘lib, avtomatik uzatma qutisining uzluksiz ishlashini ta’minlaydi.RAVENOL ATF DEXRON III H, ATF Dexron F III spetsifikatsiyasiga muvofiq moy talab etilgan hollarda mos keluvchi almashtiruvchi suyuqlik hisoblanadi.
Одобрено производителем:
Allison C-4, Allison TES-389, Voith H55.6336.3x Extended Drain (G1363), ZF TE-ML 04D, ZF TE-ML 14B, ZF TE-ML 20B, ZF TE-ML 25B
Соответствие требованиям:
Caterpillar TO-2, DTFR 13C100 (MB 236.1), DTFR 13C170 (MB 236.9), Ford MERCON®, MAN 339 L1, MAN 339 Type V1, MAN 339 Type Z1, MAN 339 Type Z2, MB 236.1, MB 236.5, MB 236.6, MB 236.9, MB 236.10, Volvo 97341, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE-ML 05L, ZF TE-ML 14A, ZF TE-ML 16L, ZF TE-ML 16R, ZF TE-ML 17C
- Доступная фасовка
- Параметры продукта
RAVENOL ATF DEXRON III H – bu avtomatik uzatma qutilari uchun mo‘ljallangan sintetik ATF moyi bo‘lib, Dexron III H turidagi transmissiya suyuqligini qo‘llash talab etilgan hollarda ishlatiladi.
Gidrokraking asosidagi baza moyi va maxsus qo‘shimchalar majmuasi asosida ishlab chiqilgan bo‘lib, avtomatik uzatma qutisining uzluksiz ishlashini ta’minlaydi.
RAVENOL ATF DEXRON III H, ATF Dexron F III spetsifikatsiyasiga muvofiq moy talab etilgan hollarda mos keluvchi almashtiruvchi suyuqlik hisoblanadi.
Ushbu mahsulot aynan avtomatik transmissiyalar uchun ishlab chiqilgan. ATF Dexron III H sifat darajasiga mos keluvchi suyuqlik qo‘llanilishi talab etilgan avtomatik transmissiyalarda qo‘llaniladi. Boshqa ATF suyuqliklari bilan aralashtirilishi mumkin. RAVENOL ATF DEXRON III H quyilishidan avval eski suyuqlikni to‘liq chiqarib yuborish tavsiya etiladi.
RAVENOL ATF Dexron III H qo‘llanishi quyidagilarni ta’minlaydi:
- Qishki past haroratlarda ham juda yaxshi moylash xossalari
- Doimiy yuqori yopishqoqlik indeksi
- Ekstremal harorat va ish sharoitlarida ham eskirishdan himoyalangan detallar ustida barqaror moy plyonkasi
- Oksidlanishga yuqori chidamlilik
- Eskirish, korroziya va ko‘piklanishdan kompleks himoya
- Muftaning muvofiqlashtirilgan ishlashi
- Muhrlovchi materiallarga nisbatan neytral ta’sir
- Inhibitorlar yordamida rangli metallarga nisbatan neytral ta’sir
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| ATF spetsifikatsiyalari | Dexron III H |
Dexron III H
|
||
| Tavsiyalar | Caterpillar TO-2, DTFR 13C100 (MB 236.1), DTFR 13C170 (MB 236.9), Ford MERCON® M-940717, MAN 339 L1, MAN 339 V1, MAN 339 Z1, MAN 339 Z2, MB 236.1, MB 236.10, MB 236.5, MB 236.6, MB 236.9, Nissan, Volvo 1161521, Volvo 1161621, VOLVO Transmission Oil 97341, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE-ML 05L, ZF TE-ML 14A, ZF TE-ML 16L, ZF TE-ML 16R, ZF TE-ML 17C |
Caterpillar TO-2, DTFR 13C100 (MB 236.1), DTFR 13C170 (MB 236.9), Ford MERCON® M-940717, MAN 339 L1, MAN 339 V1, MAN 339 Z1, MAN 339 Z2, MB 236.1, MB 236.10, MB 236.5, MB 236.6, MB 236.9, Nissan, Volvo 1161521, Volvo 1161621, VOLVO Transmission Oil 97341, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE-ML 05L, ZF TE-ML 14A, ZF TE-ML 16L, ZF TE-ML 16R, ZF TE-ML 17C
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Sintetik |
Sintetik
|
||
| Ishlab chiqaruvchi tomonidan ma’qullangan | Allison C-4, Allison TES-389, Voith H55.6336.3x Extended Drain (G1363), ZF TE-ML 04D, ZF TE-ML 14B, ZF TE-ML 20B, ZF TE-ML 25B |
Allison C-4, Allison TES-389, Voith H55.6336.3x Extended Drain (G1363), ZF TE-ML 04D, ZF TE-ML 14B, ZF TE-ML 20B, ZF TE-ML 25B
|
||
| Talablarga mos keladi | Caterpillar TO-2, DTFR 13C100 (MB 236.1), DTFR 13C170 (MB 236.9), Ford MERCON®, MAN 339 L1, MAN 339 Type V1, MAN 339 Type Z1, MAN 339 Type Z2, MB 236.1, MB 236.10, MB 236.5, MB 236.6, MB 236.9, Volvo 97341, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE-ML 05L, ZF TE-ML 14A, ZF TE-ML 16L, ZF TE-ML 16R, ZF TE-ML 17C |
Caterpillar TO-2, DTFR 13C100 (MB 236.1), DTFR 13C170 (MB 236.9), Ford MERCON®, MAN 339 L1, MAN 339 Type V1, MAN 339 Type Z1, MAN 339 Type Z2, MB 236.1, MB 236.10, MB 236.5, MB 236.6, MB 236.9, Volvo 97341, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE-ML 05L, ZF TE-ML 14A, ZF TE-ML 16L, ZF TE-ML 16R, ZF TE-ML 17C
|
||
| Spetsifikatsiyalarga mos keladi | Allison C-4, Allison TES-389, GM Dexron® II E, GM DEXRON® III F, GM Dexron® III H |
Allison C-4, Allison TES-389, GM Dexron® II E, GM DEXRON® III F, GM Dexron® III H
|
||
| Mos keladi | Nissan |
Nissan
|
||
| Mahsulotlarga mos keladi | Volvo 1161521, Volvo 1161621 |
Volvo 1161521, Volvo 1161621
|
||
| Zichlik 20°С da | g/cm³ | 847 | EN ISO 12185 |
847
g/cm³
EN ISO 12185
|
| Rang | Qizil | ingl |
Qizil
ingl
|
|
| Viskozite 100°С da | mm²/s | 7.2 | DIN 51562-1 |
7.2
mm²/s
DIN 51562-1
|
| Viskozite 40°С da | mm²/s | 33.9 | DIN 51562-1 |
33.9
mm²/s
DIN 51562-1
|
| Viskozite indeksi VI | 185 | DIN ISO 2909 |
185
DIN ISO 2909
|
|
| Brookfield usuli bo‘yicha viskozite -40°C da | mPa*s | 14.200 | ASTM D2983 |
14.200
mPa*s
ASTM D2983
|
| Qotish harorati | °C | -51 | DIN ISO 3016 |
-51
°C
DIN ISO 3016
|
| Yong‘in chiqish harorati | °C | 210 | DIN EN ISO 2592 |
210
°C
DIN EN ISO 2592
|
| Ko‘pik hosil bo‘lishi I | 24°С da | 0/0 | ASTM D892 |
0/0
24°С da
ASTM D892
|
| Ko‘pik hosil bo‘lishi II | 93.5°C da | 0/0 | ASTM D892 |
0/0
93.5°C da
ASTM D892
|
| Ko‘pik hosil bo‘lishi III | 24°С dan 93.5°C gacha | 0/0 | ASTM D892 |
0/0
24°С dan 93.5°C gacha
ASTM D892
|
| Misga nisbatan korroziya testi | 121°С / 3 soat | 1b | ASTM D130 |
1b
121°С / 3 soat
ASTM D130
|
| Ishqoriy son | mgKOH/g | 1.8 | ASTM D2896 |
1.8
mgKOH/g
ASTM D2896
|
| Ruxsatnomalar | Allison C-4, Allison TES-389, Caterpillar TO-2, DTFR 13C100 (MB 236.1), DTFR 13C170 (MB 236.9), Ford MERCON®, GM Dexron® II E, GM Dexron® III F, GM Dexron® III H, MAN 339 L1, MAN 339 Type V1, MAN 339 Type Z1, MAN 339 Type Z2, MB 236.1, MB 236.10, MB 236.5, MB 236.6, MB 236.9, Voith H55.6336.3x Extended Drain (G1363), Volvo 97341, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE-ML 04D, ZF TE-ML 05L, ZF TE-ML 14A, ZF TE-ML 14B, ZF TE-ML 16L, ZF TE-ML 16R, ZF TE-ML 17C, ZF TE-ML 20B, ZF TE-ML 25B |
Allison C-4, Allison TES-389, Caterpillar TO-2, DTFR 13C100 (MB 236.1), DTFR 13C170 (MB 236.9), Ford MERCON®, GM Dexron® II E, GM Dexron® III F, GM Dexron® III H, MAN 339 L1, MAN 339 Type V1, MAN 339 Type Z1, MAN 339 Type Z2, MB 236.1, MB 236.10, MB 236.5, MB 236.6, MB 236.9, Voith H55.6336.3x Extended Drain (G1363), Volvo 97341, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE-ML 04D, ZF TE-ML 05L, ZF TE-ML 14A, ZF TE-ML 14B, ZF TE-ML 16L, ZF TE-ML 16R, ZF TE-ML 17C, ZF TE-ML 20B, ZF TE-ML 25B
|
Ведущий мост (тормоза мокрого типа)
Для тракторов
RAVENOL Fließverbesserer
- Параметры продукта
can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of
RAVENOL Fließverbesserer
are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when
RAVENOL Fließverbesserer
is used (this is given when the goods are stored in an underground tank!).
RAVENOL Fließverbesserer
itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.
RAVENOL Fließverbesserer
will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of
RAVENOL Fließverbesserer
into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of
RAVENOL Fließverbesserer
has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added
RAVENOL Fließverbesserer
(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the
RAVENOL Fließverbesserer
reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!
| Параметр | Ед. изм | Значение | Тестирование |
|---|
Тормозная система мокрые тормоза
Для гидравлики
RAVENOL Hydraulikoel TS 32 (HLP) – yuqori samarali qo‘shimchalar bilan boyitilgan HLP toifasidagi mineral gidravlik moy. Optimal legirlangan, almashtirish intervalini uzaytiradi va turli sanoat sohalarida keng ish harorati diapazonini ta’minlaydi. Yaxshi yopishqoqlik-harorat xususiyatlarini, qarishga yuqori chidamlilikni va korroziyadan ishonchli himoyani kafolatlaydi. Maxsus qo‘shimchalar paketi tufayli ekstremal yuklamalarda eskirishga qarshi himoyani ta’minlaydi.
Соответствие требованиям:
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-38, Fives Cincinnati P-68, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest
SAE: 32W
Аналоги OEM:
Alpine 0100823, Alpine 0100824, Alpine 0100825, GM 88861678, GM 88861679, GM 88861693, GM 88861693
- Доступная фасовка
- Параметры продукта
RAVENOL Hydraulikoel TS 32 (HLP) – yuqori samarali qo‘shimchalar bilan boyitilgan HLP toifasidagi mineral gidravlik moy. Optimal legirlangan, almashtirish intervalini uzaytiradi va turli sanoat sohalarida keng ish harorati diapazonini ta’minlaydi. Yaxshi yopishqoqlik-harorat xususiyatlarini, qarishga yuqori chidamlilikni va korroziyadan ishonchli himoyani kafolatlaydi. Maxsus qo‘shimchalar paketi tufayli ekstremal yuklamalarda eskirishga qarshi himoyani ta’minlaydi.
Qo‘llanish:
RAVENOL Hydraulikoel TS 32 (HLP) har qanday gidravlik tizimlarda universal qo‘llanish uchun mo‘ljallangan. Issiqlikka kuchli ta’sir qiluvchi gidravlik tizimlar, yuqori bosimli nasoslar, kichik mexanizmlarni texnik xizmat ko‘rsatishda va yopiq tizimlarda ishchi suyuqlik sifatida foydalanish uchun tavsiya etiladi.
Qo‘llash Hydraulikoel TS 32 (HLP) quyidagilarni ta’minlaydi:
- A’lo yopishqoqlik-harorat xususiyatlari
- Eskirishdan mukammal himoya
- Korroziyaga qarshi a’lo darajadagi himoya
- Muhrlovchi materiallarga nisbatan neytral munosabat
- Moy almashtirish intervalining uzayishi
- Qarishga juda yaxshi chidamlilik
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | AFNOR NFE 48-603 HM, ASTM D6158, Atos, Bosch Rexroth RE 90220, CETOP RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-38, Fives Cincinnati P-68, FZG-Test A 8,3/90, GB 111118.1 L-HM (conventional), GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, M-2950-S, Metso, MIL-PRF-17672 E, Müller Weingarten, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, SAE MS1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, US Steel 126, US Steel 127, US Steel 136, VDMA 24318, Vickers-Pumpentest |
AFNOR NFE 48-603 HM, ASTM D6158, Atos, Bosch Rexroth RE 90220, CETOP RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-38, Fives Cincinnati P-68, FZG-Test A 8,3/90, GB 111118.1 L-HM (conventional), GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, M-2950-S, Metso, MIL-PRF-17672 E, Müller Weingarten, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, SAE MS1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, US Steel 126, US Steel 127, US Steel 136, VDMA 24318, Vickers-Pumpentest
|
||
| Viskozite | 32W |
32W
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Mineral |
Mineral
|
||
| ASTM | D6158 |
D6158
|
||
| Talablarga mos keladi | AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-38, Fives Cincinnati P-68, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest |
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-38, Fives Cincinnati P-68, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51524-2, ISO 6743-4 HM |
DIN 51524-2, ISO 6743-4 HM
|
||
| Mos keladi | Atos, Metso |
Atos, Metso
|
||
| Zichlik 20°С da | g/cm³ | 848 | EN ISO 12185 |
848
g/cm³
EN ISO 12185
|
| Rang | Och sariq | ingl |
Och sariq
ingl
|
|
| Viskozite 100°С da | mm²/s | 5.8 | DIN 51562-1 |
5.8
mm²/s
DIN 51562-1
|
| Viskozite 40°С da | mm²/s | 32.1 | DIN 51562-1 |
32.1
mm²/s
DIN 51562-1
|
| Viskozite indeksi VI | 123 | DIN ISO 2909 |
123
DIN ISO 2909
|
|
| Qotish harorati | °C | -30 | DIN ISO 3016 |
-30
°C
DIN ISO 3016
|
| Yong‘in chiqish harorati | °C | 224 | DIN EN ISO 2592 |
224
°C
DIN EN ISO 2592
|
| Ruxsatnomalar | AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Danieli Hydraulics, DIN 51524-2, Eaton Vickers I-286-S, Fives Cincinnati P-38, Fives Cincinnati P-68, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, ISO 6743-4 HM, JCMAS HK, MIL-PRF-17672 E, Müller, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest |
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Danieli Hydraulics, DIN 51524-2, Eaton Vickers I-286-S, Fives Cincinnati P-38, Fives Cincinnati P-68, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, ISO 6743-4 HM, JCMAS HK, MIL-PRF-17672 E, Müller, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest
|
Гидравлическое масло
RAVENOL Hydraulikoel TS 46 (HLP) – HLP toifasiga kiruvchi mineral gidravlik moy. Yuqori sifatli bazaviy moy va maxsus qo‘shimchalar kompleksidan foydalanilganligi sababli, u yaxshi yopishqoqlik-harorat xususiyatlari, yuqori yuklamalarda eskirish va korroziyaga qarshi ishonchli himoya, shuningdek muhrlovchi materiallarga nisbatan neytral munosabatni ta’minlaydi.
Соответствие требованиям:
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Cetop RP 2950-S, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers Pumpentest, ZF TE-ML 07H
SAE: 46
Аналоги OEM:
Alpine 0100843, Alpine 0100844, Alpine 0100845, GM 88861680, GM 88861680
- Доступная фасовка
- Параметры продукта
Объем:
1 L
Артикул:
1323105-001
Объем:
10 L
Артикул:
1323105-010
Объем:
20 L, ecobox
Артикул:
1323105-B20
Объем:
208 L, bosilgan barrel
Артикул:
1323105-D28
RAVENOL Hydraulikoel TS 46 (HLP) – HLP toifasiga kiruvchi mineral gidravlik moy. Yuqori sifatli bazaviy moy va maxsus qo‘shimchalar kompleksidan foydalanilganligi sababli, u yaxshi yopishqoqlik-harorat xususiyatlari, yuqori yuklamalarda eskirish va korroziyaga qarshi ishonchli himoya, shuningdek muhrlovchi materiallarga nisbatan neytral munosabatni ta’minlaydi.
RAVENOL Hydraulikoel TS 46 (HLP) gidravlik moyi qurilish va kon texnikasi gidravlik tizimlarida, yuqori bosimli nasoslarda, shuningdek kichik mexanizmlarga xizmat ko‘rsatishda va yopiq tizimlarda ishchi suyuqlik sifatida universal qo‘llaniladi.
Qo‘llash Hydraulikoel TS 46 (HLP) quyidagilarni ta’minlaydi:
- Ish samaradorligining yuqori darajasi
- Yaxshi yopishqoqlik-harorat xususiyatlari
- Eskirishga nisbatan barqarorlik
- Eskirishdan mukammal himoya
- Korroziyadan uzoq muddatli himoya
- Rezina muhrlovchilarga nisbatan neytrallik
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | AFNOR NFE 48-603 HM, Arburg, ASTM D6158, Atos, Bosch Rexroth RE 90220, CETOP RP 2950-S, CETOP RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG-Test A 8,3/90, GB 111118.1 L-HM (conventional), GM LH-02-1-04, ISO 11158 HM, JCMAS HK, LS-2, Metso, MIL-PRF-17672 E, Müller Weingarten, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, SAE MS1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, US Steel 126, US Steel 127, US Steel 136, VDMA 24318, Verwendung lt. Betriebsanleitung, Vickers-Pumpentest, ZF TE-ML 07H |
AFNOR NFE 48-603 HM, Arburg, ASTM D6158, Atos, Bosch Rexroth RE 90220, CETOP RP 2950-S, CETOP RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG-Test A 8,3/90, GB 111118.1 L-HM (conventional), GM LH-02-1-04, ISO 11158 HM, JCMAS HK, LS-2, Metso, MIL-PRF-17672 E, Müller Weingarten, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, SAE MS1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, US Steel 126, US Steel 127, US Steel 136, VDMA 24318, Verwendung lt. Betriebsanleitung, Vickers-Pumpentest, ZF TE-ML 07H
|
||
| Viskozite | 46 |
46
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Mineral |
Mineral
|
||
| ASTM | D6158 |
D6158
|
||
| Talablarga mos keladi | AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 2950-S, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers Pumpentest, ZF TE-ML 07H |
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 2950-S, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers Pumpentest, ZF TE-ML 07H
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51524-2, ISO 6743-4 HM |
DIN 51524-2, ISO 6743-4 HM
|
||
| Mos keladi | Arburg, Atos, Metso |
Arburg, Atos, Metso
|
||
| Zichlik 20°С da | g/cm³ | 857 | EN ISO 12185 |
857
g/cm³
EN ISO 12185
|
| Rang | Och sariq | ingl |
Och sariq
ingl
|
|
| Viskozite 100°С da | mm²/s | 7.2 | DIN 51562-1 |
7.2
mm²/s
DIN 51562-1
|
| Viskozite 40°С da | mm²/s | 47 | DIN 51562-1 |
47
mm²/s
DIN 51562-1
|
| Viskozite indeksi VI | 113 | DIN ISO 2909 |
113
DIN ISO 2909
|
|
| Qotish harorati | °C | -27 | DIN ISO 3016 |
-27
°C
DIN ISO 3016
|
| Yong‘in chiqish harorati | °C | 238 | DIN EN ISO 2592 |
238
°C
DIN EN ISO 2592
|
| Emulsiyaga chidamlilik testi | 30 daq. maksimum 54/82°С | 40ml/40ml/10min. | DIN 51757 |
40ml/40ml/10min.
30 daq. maksimum 54/82°С
DIN 51757
|
| Eskirish – SSR | % | 2000 | DIN 51587 |
2000
%
DIN 51587
|
| Tishli uzatma yog‘ining yeyilishga chidamliligini aniqlash testi | %wt. | 12 | DIN 51354/2 |
12
%wt.
DIN 51354/2
|
| Ruxsatnomalar | AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 2950-S, Cetop RP 91H HM, Danieli Hydraulics, DIN 51524-2, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, ISO 11158 HM, ISO 6743-4 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers Pumpentest, ZF TE-ML 07H |
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 2950-S, Cetop RP 91H HM, Danieli Hydraulics, DIN 51524-2, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, ISO 11158 HM, ISO 6743-4 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers Pumpentest, ZF TE-ML 07H
|
Гидравлическая система управление с усилителем
Для гидравлики
RAVENOL Hydraulikoel TS 32 (HLP) – yuqori samarali qo‘shimchalar bilan boyitilgan HLP toifasidagi mineral gidravlik moy. Optimal legirlangan, almashtirish intervalini uzaytiradi va turli sanoat sohalarida keng ish harorati diapazonini ta’minlaydi. Yaxshi yopishqoqlik-harorat xususiyatlarini, qarishga yuqori chidamlilikni va korroziyadan ishonchli himoyani kafolatlaydi. Maxsus qo‘shimchalar paketi tufayli ekstremal yuklamalarda eskirishga qarshi himoyani ta’minlaydi.
Соответствие требованиям:
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-38, Fives Cincinnati P-68, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest
SAE: 32W
Аналоги OEM:
Alpine 0100823, Alpine 0100824, Alpine 0100825, GM 88861678, GM 88861679, GM 88861693, GM 88861693
- Доступная фасовка
- Параметры продукта
RAVENOL Hydraulikoel TS 32 (HLP) – yuqori samarali qo‘shimchalar bilan boyitilgan HLP toifasidagi mineral gidravlik moy. Optimal legirlangan, almashtirish intervalini uzaytiradi va turli sanoat sohalarida keng ish harorati diapazonini ta’minlaydi. Yaxshi yopishqoqlik-harorat xususiyatlarini, qarishga yuqori chidamlilikni va korroziyadan ishonchli himoyani kafolatlaydi. Maxsus qo‘shimchalar paketi tufayli ekstremal yuklamalarda eskirishga qarshi himoyani ta’minlaydi.
Qo‘llanish:
RAVENOL Hydraulikoel TS 32 (HLP) har qanday gidravlik tizimlarda universal qo‘llanish uchun mo‘ljallangan. Issiqlikka kuchli ta’sir qiluvchi gidravlik tizimlar, yuqori bosimli nasoslar, kichik mexanizmlarni texnik xizmat ko‘rsatishda va yopiq tizimlarda ishchi suyuqlik sifatida foydalanish uchun tavsiya etiladi.
Qo‘llash Hydraulikoel TS 32 (HLP) quyidagilarni ta’minlaydi:
- A’lo yopishqoqlik-harorat xususiyatlari
- Eskirishdan mukammal himoya
- Korroziyaga qarshi a’lo darajadagi himoya
- Muhrlovchi materiallarga nisbatan neytral munosabat
- Moy almashtirish intervalining uzayishi
- Qarishga juda yaxshi chidamlilik
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | AFNOR NFE 48-603 HM, ASTM D6158, Atos, Bosch Rexroth RE 90220, CETOP RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-38, Fives Cincinnati P-68, FZG-Test A 8,3/90, GB 111118.1 L-HM (conventional), GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, M-2950-S, Metso, MIL-PRF-17672 E, Müller Weingarten, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, SAE MS1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, US Steel 126, US Steel 127, US Steel 136, VDMA 24318, Vickers-Pumpentest |
AFNOR NFE 48-603 HM, ASTM D6158, Atos, Bosch Rexroth RE 90220, CETOP RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-38, Fives Cincinnati P-68, FZG-Test A 8,3/90, GB 111118.1 L-HM (conventional), GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, M-2950-S, Metso, MIL-PRF-17672 E, Müller Weingarten, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, SAE MS1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, US Steel 126, US Steel 127, US Steel 136, VDMA 24318, Vickers-Pumpentest
|
||
| Viskozite | 32W |
32W
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Mineral |
Mineral
|
||
| ASTM | D6158 |
D6158
|
||
| Talablarga mos keladi | AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-38, Fives Cincinnati P-68, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest |
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-38, Fives Cincinnati P-68, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51524-2, ISO 6743-4 HM |
DIN 51524-2, ISO 6743-4 HM
|
||
| Mos keladi | Atos, Metso |
Atos, Metso
|
||
| Zichlik 20°С da | g/cm³ | 848 | EN ISO 12185 |
848
g/cm³
EN ISO 12185
|
| Rang | Och sariq | ingl |
Och sariq
ingl
|
|
| Viskozite 100°С da | mm²/s | 5.8 | DIN 51562-1 |
5.8
mm²/s
DIN 51562-1
|
| Viskozite 40°С da | mm²/s | 32.1 | DIN 51562-1 |
32.1
mm²/s
DIN 51562-1
|
| Viskozite indeksi VI | 123 | DIN ISO 2909 |
123
DIN ISO 2909
|
|
| Qotish harorati | °C | -30 | DIN ISO 3016 |
-30
°C
DIN ISO 3016
|
| Yong‘in chiqish harorati | °C | 224 | DIN EN ISO 2592 |
224
°C
DIN EN ISO 2592
|
| Ruxsatnomalar | AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Danieli Hydraulics, DIN 51524-2, Eaton Vickers I-286-S, Fives Cincinnati P-38, Fives Cincinnati P-68, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, ISO 6743-4 HM, JCMAS HK, MIL-PRF-17672 E, Müller, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest |
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Danieli Hydraulics, DIN 51524-2, Eaton Vickers I-286-S, Fives Cincinnati P-38, Fives Cincinnati P-68, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, GM LS-2, ISO 11158 HM, ISO 6743-4 HM, JCMAS HK, MIL-PRF-17672 E, Müller, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers M-2950-S, Vickers Pumpentest
|
Гидравлическое масло
RAVENOL Hydraulikoel TS 46 (HLP) – HLP toifasiga kiruvchi mineral gidravlik moy. Yuqori sifatli bazaviy moy va maxsus qo‘shimchalar kompleksidan foydalanilganligi sababli, u yaxshi yopishqoqlik-harorat xususiyatlari, yuqori yuklamalarda eskirish va korroziyaga qarshi ishonchli himoya, shuningdek muhrlovchi materiallarga nisbatan neytral munosabatni ta’minlaydi.
Соответствие требованиям:
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Cetop RP 2950-S, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers Pumpentest, ZF TE-ML 07H
SAE: 46
Аналоги OEM:
Alpine 0100843, Alpine 0100844, Alpine 0100845, GM 88861680, GM 88861680
- Доступная фасовка
- Параметры продукта
Объем:
1 L
Артикул:
1323105-001
Объем:
10 L
Артикул:
1323105-010
Объем:
20 L, ecobox
Артикул:
1323105-B20
Объем:
208 L, bosilgan barrel
Артикул:
1323105-D28
RAVENOL Hydraulikoel TS 46 (HLP) – HLP toifasiga kiruvchi mineral gidravlik moy. Yuqori sifatli bazaviy moy va maxsus qo‘shimchalar kompleksidan foydalanilganligi sababli, u yaxshi yopishqoqlik-harorat xususiyatlari, yuqori yuklamalarda eskirish va korroziyaga qarshi ishonchli himoya, shuningdek muhrlovchi materiallarga nisbatan neytral munosabatni ta’minlaydi.
RAVENOL Hydraulikoel TS 46 (HLP) gidravlik moyi qurilish va kon texnikasi gidravlik tizimlarida, yuqori bosimli nasoslarda, shuningdek kichik mexanizmlarga xizmat ko‘rsatishda va yopiq tizimlarda ishchi suyuqlik sifatida universal qo‘llaniladi.
Qo‘llash Hydraulikoel TS 46 (HLP) quyidagilarni ta’minlaydi:
- Ish samaradorligining yuqori darajasi
- Yaxshi yopishqoqlik-harorat xususiyatlari
- Eskirishga nisbatan barqarorlik
- Eskirishdan mukammal himoya
- Korroziyadan uzoq muddatli himoya
- Rezina muhrlovchilarga nisbatan neytrallik
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | AFNOR NFE 48-603 HM, Arburg, ASTM D6158, Atos, Bosch Rexroth RE 90220, CETOP RP 2950-S, CETOP RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG-Test A 8,3/90, GB 111118.1 L-HM (conventional), GM LH-02-1-04, ISO 11158 HM, JCMAS HK, LS-2, Metso, MIL-PRF-17672 E, Müller Weingarten, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, SAE MS1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, US Steel 126, US Steel 127, US Steel 136, VDMA 24318, Verwendung lt. Betriebsanleitung, Vickers-Pumpentest, ZF TE-ML 07H |
AFNOR NFE 48-603 HM, Arburg, ASTM D6158, Atos, Bosch Rexroth RE 90220, CETOP RP 2950-S, CETOP RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG-Test A 8,3/90, GB 111118.1 L-HM (conventional), GM LH-02-1-04, ISO 11158 HM, JCMAS HK, LS-2, Metso, MIL-PRF-17672 E, Müller Weingarten, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, SAE MS1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, US Steel 126, US Steel 127, US Steel 136, VDMA 24318, Verwendung lt. Betriebsanleitung, Vickers-Pumpentest, ZF TE-ML 07H
|
||
| Viskozite | 46 |
46
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Mineral |
Mineral
|
||
| ASTM | D6158 |
D6158
|
||
| Talablarga mos keladi | AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 2950-S, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers Pumpentest, ZF TE-ML 07H |
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 2950-S, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers Pumpentest, ZF TE-ML 07H
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51524-2, ISO 6743-4 HM |
DIN 51524-2, ISO 6743-4 HM
|
||
| Mos keladi | Arburg, Atos, Metso |
Arburg, Atos, Metso
|
||
| Zichlik 20°С da | g/cm³ | 857 | EN ISO 12185 |
857
g/cm³
EN ISO 12185
|
| Rang | Och sariq | ingl |
Och sariq
ingl
|
|
| Viskozite 100°С da | mm²/s | 7.2 | DIN 51562-1 |
7.2
mm²/s
DIN 51562-1
|
| Viskozite 40°С da | mm²/s | 47 | DIN 51562-1 |
47
mm²/s
DIN 51562-1
|
| Viskozite indeksi VI | 113 | DIN ISO 2909 |
113
DIN ISO 2909
|
|
| Qotish harorati | °C | -27 | DIN ISO 3016 |
-27
°C
DIN ISO 3016
|
| Yong‘in chiqish harorati | °C | 238 | DIN EN ISO 2592 |
238
°C
DIN EN ISO 2592
|
| Emulsiyaga chidamlilik testi | 30 daq. maksimum 54/82°С | 40ml/40ml/10min. | DIN 51757 |
40ml/40ml/10min.
30 daq. maksimum 54/82°С
DIN 51757
|
| Eskirish – SSR | % | 2000 | DIN 51587 |
2000
%
DIN 51587
|
| Tishli uzatma yog‘ining yeyilishga chidamliligini aniqlash testi | %wt. | 12 | DIN 51354/2 |
12
%wt.
DIN 51354/2
|
| Ruxsatnomalar | AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 2950-S, Cetop RP 91H HM, Danieli Hydraulics, DIN 51524-2, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, ISO 11158 HM, ISO 6743-4 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers Pumpentest, ZF TE-ML 07H |
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 2950-S, Cetop RP 91H HM, Danieli Hydraulics, DIN 51524-2, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, ISO 11158 HM, ISO 6743-4 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers Pumpentest, ZF TE-ML 07H
|
