Поиск по VIN, марке, модели, типу техники или названию агрегата, по артикулу любого масла:
Масло для JCB - Telescopic manipulators - 514-56 (Stage IV / Tier 4f (SCR))
JCB Telescopic manipulators 514-56 (Stage IV / Tier 4f (SCR)), год выпуска с 2015 - Моторное масло, акпп, трансмиссионное масло, антифриз, тормозная жидкость, жидкость гур (гидроусилителя) и другие жидкости.
Колесные редукторы сзади, спереди
Getriebeol UTTO Arctic
Для тракторов
RAVENOL Fließverbesserer
- Параметры продукта
can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of
RAVENOL Fließverbesserer
are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when
RAVENOL Fließverbesserer
is used (this is given when the goods are stored in an underground tank!).
RAVENOL Fließverbesserer
itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.
RAVENOL Fließverbesserer
will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of
RAVENOL Fließverbesserer
into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of
RAVENOL Fließverbesserer
has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added
RAVENOL Fließverbesserer
(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the
RAVENOL Fließverbesserer
reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!
| Параметр | Ед. изм | Значение | Тестирование |
|---|
Дифференциал задний
Getriebeol UTTO Arctic
Для тракторов
RAVENOL Fließverbesserer
- Параметры продукта
can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of
RAVENOL Fließverbesserer
are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when
RAVENOL Fließverbesserer
is used (this is given when the goods are stored in an underground tank!).
RAVENOL Fließverbesserer
itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.
RAVENOL Fließverbesserer
will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of
RAVENOL Fließverbesserer
into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of
RAVENOL Fließverbesserer
has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added
RAVENOL Fließverbesserer
(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the
RAVENOL Fließverbesserer
reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!
| Параметр | Ед. изм | Значение | Тестирование |
|---|
Дифференциал передний
Getriebeol UTTO Arctic
Для тракторов
RAVENOL Fließverbesserer
- Параметры продукта
can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of
RAVENOL Fließverbesserer
are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when
RAVENOL Fließverbesserer
is used (this is given when the goods are stored in an underground tank!).
RAVENOL Fließverbesserer
itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.
RAVENOL Fließverbesserer
will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of
RAVENOL Fließverbesserer
into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of
RAVENOL Fließverbesserer
has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added
RAVENOL Fließverbesserer
(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the
RAVENOL Fließverbesserer
reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!
| Параметр | Ед. изм | Значение | Тестирование |
|---|
Гидравлическая тормозная система
Hydraulikol TSX 15 (HVPL)
Гидравлическое масло
RAVENOL Hydraulikoel TSX 15 (HVLP) is high quality multi-grade hydraulic oil type HVLP based on special selected solvent refined basic oils. It is characterised by a high stable viscosity index and a solid corrosion protection. Efficient additives offer an excellent corrosion protection even under extreme loads. The behaviour of sealing materials is neutral.
Соответствие требованиям:
AFNOR NFE 48-603 HV, AFNOR NFE 48-690/1, Bosch Rexroth RE 90220, Cetop RP 91H HV, GB 111118.1 L-HV, ISO 11158 HV, SAE MS 1004, Sauer-Danfoss 520L0463
SAE: 15
Аналоги OEM:
Scania 2252143
- Доступная фасовка
- Параметры продукта
Application Note
RAVENOL Hydraulikoel TSX 15 (HVLP) is suitable for heavy loaded hydraulic machines of the industry, for earth moving machines and agricultural machines. Preferred use in case of great variations of the operation temperature. No use in case of silver and/or silver-coated components in the hydraulic machines.
Characteristics
- A high and stable viscosity index
- An excellent corrosion protection
- An excellent protection against wear
- A very good air and water separation behaviour to prevent foam formation
- Neutral behaviour towards sealing of plastics
- A very low pour point
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| SAE | 15 |
15
|
||
| Type | Mineral |
Mineral
|
||
| Recomendations | AFNOR NFE 48-603 HV, AFNOR NFE 48-690/1, Bosch Rexroth RE 90220, Cetop RP 91H HV, GB 111118.1 L-HV, ISO 11158 HV, SAE MS 1004, Sauer-Danfoss 520L0463 |
AFNOR NFE 48-603 HV, AFNOR NFE 48-690/1, Bosch Rexroth RE 90220, Cetop RP 91H HV, GB 111118.1 L-HV, ISO 11158 HV, SAE MS 1004, Sauer-Danfoss 520L0463
|
||
| specification | DIN 51524-3, ISO 6743-4 HV |
DIN 51524-3, ISO 6743-4 HV
|
||
| Density at 20 °C | g/cm³ | 839.2 | EN ISO 12185 |
839.2
g/cm³
EN ISO 12185
|
| Color | Yellow | visual |
Yellow
visual
|
|
| Viscosity at 100 °C | mm²/s | 3.9 | DIN 51562-1 |
3.9
mm²/s
DIN 51562-1
|
| Viscosity at 40 °C | mm²/s | 15.1 | DIN 51562-1 |
15.1
mm²/s
DIN 51562-1
|
| Viscosity Index VI | 166 | DIN ISO 2909 |
166
DIN ISO 2909
|
|
| Pourpoint | °C | -42 | DIN ISO 3016 |
-42
°C
DIN ISO 3016
|
| Flashpoint | °C | 180 | DIN EN ISO 2592 |
180
°C
DIN EN ISO 2592
|
| Approvals | AFNOR NFE 48-603 HV, AFNOR NFE 48-690/1, Bosch Rexroth RE 90220, Cetop RP 91H HV, DIN 51524-3, GB 111118.1 L-HV, ISO 11158 HV, ISO 6743-4 HV, SAE MS 1004, Sauer-Danfoss 520L0463 |
AFNOR NFE 48-603 HV, AFNOR NFE 48-690/1, Bosch Rexroth RE 90220, Cetop RP 91H HV, DIN 51524-3, GB 111118.1 L-HV, ISO 11158 HV, ISO 6743-4 HV, SAE MS 1004, Sauer-Danfoss 520L0463
|
||
| Recommendations | AFNOR NFE 48-603 HV, AFNOR NFE 48-690/1, Bosch Rexroth RE 90220, CETOP RP 91H HV, GB 111118.1 L-HV, ISO 11158 HV, SAE MS1004, Sauer-Danfoss 520L0463 |
AFNOR NFE 48-603 HV, AFNOR NFE 48-690/1, Bosch Rexroth RE 90220, CETOP RP 91H HV, GB 111118.1 L-HV, ISO 11158 HV, SAE MS1004, Sauer-Danfoss 520L0463
|
Гидравлическая система
Тракторное масло
RAVENOL STOU SAE 10W-40 is an up-to-date multifunctional lubricating oil for agricultural machinery, excavators and construction machinery and is formulated with top-grade solvent refined base oils and additives.
Соответствие требованиям:
Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 68 HVLP, ISO VG 100 HVLP, John Deere J20 C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
- Доступная фасовка
- Параметры продукта
Объем:
5 լ
Артикул:
1310111-005
Объем:
10 լ
Артикул:
1310111-010
Объем:
20 լ, ecobox
Артикул:
1310111-B20
Объем:
60 լ
Артикул:
1310111-060
Объем:
1 000 լ
Артикул:
1310111-700
Объем:
208 լ
Артикул:
1310111-208
RAVENOL STOU SAE 10W-40 is an up-to-date multifunctional lubricating oil for agricultural machinery, excavators and construction machinery and is formulated with top-grade solvent refined base oils and additives.
RAVENOL STOU SAE 10W-40 meets the recommendations of all well known tractor manufacturers and is equal to use in engines, transmissions and hydraulic systems of modern tractors. Ensures trouble-free operation of all units in all seasons.
Application Note
RAVENOL STOU SAE 10W-40 has a wide range of applications in engines, transmissions and hydraulic systems of modern tractors.
RAVENOL STOU SAE 10W-40 is suitable as an engine oil for gasoline engines and intake and turbo charged diesel engines, also as gear oil (including wet brakes) and as hydraulic oil.
Characteristics
- A powerful dispersion and detergency
- A high activity against wear, corrosion and foam
- A very strong resistance to oxidation
- A high and stable viscosity index
- An excellent extreme pressure properties
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Viskozite | 10W-40 |
10W-40
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| API | CG-4, GL-4, SF |
CG-4, GL-4, SF
|
||
| ACEA | E3 |
E3
|
||
| Talablarga mos keladi | Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, John Deere J20 C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B |
Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, John Deere J20 C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
|
||
| Mos keladi | Atlas Copco Kompressor |
Atlas Copco Kompressor
|
||
| Zichlik 20°С da | g/cm³ | 864 | EN ISO 12185 |
864
g/cm³
EN ISO 12185
|
| Rang | tan | տեսողական |
tan
տեսողական
|
|
| Viskozite 100°С da | mm²/s | 14.7 | DIN 51562-1 |
14.7
mm²/s
DIN 51562-1
|
| Viskozite 40°С da | mm²/s | 101.1 | DIN 51562-1 |
101.1
mm²/s
DIN 51562-1
|
| Viskozite indeksi VI | 151 | DIN ISO 2909 |
151
DIN ISO 2909
|
|
| Qotish harorati | °C | -33 | DIN ISO 3016 |
-33
°C
DIN ISO 3016
|
| Yong‘in chiqish harorati | °C | 234 | DIN EN ISO 2592 |
234
°C
DIN EN ISO 2592
|
| Ishqoriy son | mgKOH/g | 12.4 | ASTM D2896 |
12.4
mgKOH/g
ASTM D2896
|
| Sulfatli kul miqdori | %wt. | 1.45 | DIN 51575 |
1.45
%wt.
DIN 51575
|
| Ruxsatnomalar | Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, John Deere J20 C, John Deere J20C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B |
Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, John Deere J20 C, John Deere J20C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
|
Для гидравлики
RAVENOL Hydraulikoel TSX 32 – bu Germaniyada yuqori sifatli mineral bazaviy moylar asosida, patentlangan gidrotozalash texnologiyasi qo‘llanilgan holda ishlab chiqarilgan gidravlik moy.
Соответствие требованиям:
Bosch Rexroth RE 90220, Eaton Vickers I-286-S, Eaton Vickers M-2950-S, Fives Cincinnati P-68, GM LH-03-1-04, GM LS-2, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sauer-Danfoss 520L0463
SAE: 32W
Аналоги OEM:
Alpine 0100836, Alpine 0100837, Alpine 0100837, Scania 2252140, Volvo 11706208, Volvo 11706209, Volvo VOE11706208, Volvo VOE11706209
- Доступная фасовка
- Параметры продукта
Объем:
1 L
Артикул:
1323204-001
Объем:
5 L
Артикул:
1323204-005
Объем:
20 L, ecobox
Артикул:
1323204-B20
Объем:
1 000 L
Артикул:
1323204-700
RAVENOL Hydraulikoel TSX 32 – bu Germaniyada yuqori sifatli mineral bazaviy moylar asosida, patentlangan gidrotozalash texnologiyasi qo‘llanilgan holda ishlab chiqarilgan gidravlik moy.
Qo‘shimchalar paketi korroziyaga, oksidlanishga va ko‘piklanishga qarshi inhibitörlarni, shuningdek, lapatkali va tishli nasoslar kontakt yuzalarida minimal eskirishni ta’minlaydigan, bronza-po‘lat juftliklari va kumush bilan qoplangan detallar mavjud bo‘lgan axial-porshenli nasoslar uchun mo‘ljallangan yuqori barqarorlikdagi eskirishga qarshi maxsus qo‘shimchani o‘z ichiga oladi.
Zamonaviy qo‘shimcha texnologiyalari moyga harorat va oksidlovchilarga nisbatan yuqori barqarorlikni ta’minlaydi. Suv mavjud bo‘lsa ham, moy a’lo darajadagi filtrlanish, past gidrolizga moyillik va yaxshi suv ajratish qobiliyatini namoyon qiladi.
Moy zang va korroziyaga qarshi mukammal himoya, tez havo ajratish va ko‘piklanishni oldini olishni ta’minlaydi. RAVENOL Hydraulikoel TSX 32 gidravlik moyining asosiy farqli jihati – bu og‘ir ish sharoitlarida ishlaydigan yuqori tezlikdagi, yuqori bosimli gidravlik tizimlarda uchraydigan katta silliqlash kuchlariga nisbatan boshqa moylarga qaraganda yuqori chidamliligidir. Juda past qotish harorati a’lo past haroratli xususiyatlarni ta’minlaydi. Qo‘llash Hydraulikol TSX 32 quyidagilarni ta’minlaydi:
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | Bosch Rexroth RE 90220, Eaton Vickers I-286-S, Eaton Vickers M-2950-S, Fives Cincinnati P-68, GM LH-03-1-04, GM LS-2, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, Sauer-Danfoss 520L0463 |
Bosch Rexroth RE 90220, Eaton Vickers I-286-S, Eaton Vickers M-2950-S, Fives Cincinnati P-68, GM LH-03-1-04, GM LS-2, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, Sauer-Danfoss 520L0463
|
||
| Viskozite | 32W |
32W
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Mineral |
Mineral
|
||
| Talablarga mos keladi | Bosch Rexroth RE 90220, Eaton Vickers I-286-S, Eaton Vickers M-2950-S, Fives Cincinnati P-68, GM LH-03-1-04, GM LS-2, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sauer-Danfoss 520L0463 |
Bosch Rexroth RE 90220, Eaton Vickers I-286-S, Eaton Vickers M-2950-S, Fives Cincinnati P-68, GM LH-03-1-04, GM LS-2, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sauer-Danfoss 520L0463
|
||
| Spetsifikatsiyalarga mos keladi | AFNOR NFE 48-603 HV, AFNOR NFE 48-690/1, Cetop RP 91H HV, DIN 51524-3, GB 111118.1 L-HV, ISO 11158 HV, ISO 6743-4 HV, JCMAS HK VG32W, SAE MS 1004, U.S. Steel 127, U.S. Steel 136 |
AFNOR NFE 48-603 HV, AFNOR NFE 48-690/1, Cetop RP 91H HV, DIN 51524-3, GB 111118.1 L-HV, ISO 11158 HV, ISO 6743-4 HV, JCMAS HK VG32W, SAE MS 1004, U.S. Steel 127, U.S. Steel 136
|
||
| Zichlik 20°С da | g/cm³ | 845 | EN ISO 12185 |
845
g/cm³
EN ISO 12185
|
| Rang | Sariq | ingl |
Sariq
ingl
|
|
| Viskozite 100°С da | mm²/s | 6.3 | DIN 51562-1 |
6.3
mm²/s
DIN 51562-1
|
| Viskozite 40°С da | mm²/s | 32 | DIN 51562-1 |
32
mm²/s
DIN 51562-1
|
| Viskozite indeksi VI | 152 | DIN ISO 2909 |
152
DIN ISO 2909
|
|
| Qotish harorati | °C | -39 | DIN ISO 3016 |
-39
°C
DIN ISO 3016
|
| Yong‘in chiqish harorati | °C | 227 | DIN EN ISO 2592 |
227
°C
DIN EN ISO 2592
|
| Ishqoriy son | mgKOH/g | 0.4 | ASTM D2896 |
0.4
mgKOH/g
ASTM D2896
|
| Sulfatli kul miqdori | %wt. | 0.06 | DIN 51575 |
0.06
%wt.
DIN 51575
|
| Ruxsatnomalar | AFNOR NFE 48-603 HV, AFNOR NFE 48-690/1, Bosch Rexroth RE 90220, Cetop RP 91H HV, DIN 51524-3, Eaton Vickers I-286-S, Eaton Vickers M-2950-S, Fives Cincinnati P-68, GB 111118.1 L-HV, GM LH-03-1-04, GM LS-2, ISO 11158 HV, ISO 6743-4 HV, JCMAS HK VG32W, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004, Sauer-Danfoss 520L0463, U.S. Steel 127, U.S. Steel 136 |
AFNOR NFE 48-603 HV, AFNOR NFE 48-690/1, Bosch Rexroth RE 90220, Cetop RP 91H HV, DIN 51524-3, Eaton Vickers I-286-S, Eaton Vickers M-2950-S, Fives Cincinnati P-68, GB 111118.1 L-HV, GM LH-03-1-04, GM LS-2, ISO 11158 HV, ISO 6743-4 HV, JCMAS HK VG32W, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004, Sauer-Danfoss 520L0463, U.S. Steel 127, U.S. Steel 136
|
Для гидравлики
RAVENOL Hydraulikoel TSX 46 (HVLP) – HVLP toifasiga kiruvchi mineral gidravlik moy. Yuqori darajada tozalangan bazaviy moy va maxsus qo‘shimchalar kompleksidan foydalanilishi natijasida barqaror yopishqoqlik indeksi, eskirish va korroziyaga qarshi ishonchli himoya, shuningdek muhrlovchi materiallarga nisbatan neytral munosabat ta’minlanadi.
Соответствие требованиям:
AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump
- Доступная фасовка
- Параметры продукта
Объем:
5 L
Артикул:
1323205-005
Объем:
10 L
Артикул:
1323205-010
Объем:
20 L, ecobox
Артикул:
1323205-B20
Объем:
60 L
Артикул:
1323205-060
Объем:
208 L, bosilgan barrel
Артикул:
1323205-D28
Объем:
1 000 L
Артикул:
1323205-700
RAVENOL Hydraulikoel TSX 46 (HVLP) – HVLP toifasiga kiruvchi mineral gidravlik moy. Yuqori darajada tozalangan bazaviy moy va maxsus qo‘shimchalar kompleksidan foydalanilishi natijasida barqaror yopishqoqlik indeksi, eskirish va korroziyaga qarshi ishonchli himoya, shuningdek muhrlovchi materiallarga nisbatan neytral munosabat ta’minlanadi.
RAVENOL Hydraulikoel TSX 46 (HVLP) gidravlik moylari og‘ir ish sharoitida ishlovchi qurilish va kon texnikasi gidravlik tizimlarida qo‘llaniladi, jumladan yuqori tezlikdagi va yuqori bosimli lapatkali, tishli va axial-porshenli nasoslar. Kumush yoki kumush bilan qoplangan detallar mavjud bo‘lgan gidravlik tizimlarda qo‘llash mumkin emas.
Qo‘llash Hydraulikol TSX 46 quyidagilarni ta’minlaydi:
- Doimiy yuqori yopishqoqlik indeksi
- Eskirishdan mukammal himoya
- Korroziyaga qarshi a’lo darajadagi himoya
- Ko‘piklanishga qarshi himoya
- Plastmassali muhrlarga nisbatan neytral munosabat
- Past qotish harorati
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | AFNOR 48-603 HV, CETOP RP 91H HV, Cincinnati Milacron P-68 (HM-32), Cincinnati Milacron P-69 (HM-68), Cincinnati Milacron P-70 (HM-46), FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, US Steel 127, US Steel 136, Vickers Vane Pump |
AFNOR 48-603 HV, CETOP RP 91H HV, Cincinnati Milacron P-68 (HM-32), Cincinnati Milacron P-69 (HM-68), Cincinnati Milacron P-70 (HM-46), FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, US Steel 127, US Steel 136, Vickers Vane Pump
|
||
| Viskozite | 46 |
46
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Mineral |
Mineral
|
||
| Talablarga mos keladi | AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump |
AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51524-3, ISO 6743-4 HV |
DIN 51524-3, ISO 6743-4 HV
|
||
| Zichlik 20°С da | g/cm³ | 855 | EN ISO 12185 |
855
g/cm³
EN ISO 12185
|
| Rang | Sariq | ingl |
Sariq
ingl
|
|
| Viskozite 100°С da | mm²/s | 7.9 | DIN 51562-1 |
7.9
mm²/s
DIN 51562-1
|
| Viskozite 40°С da | mm²/s | 45 | DIN 51562-1 |
45
mm²/s
DIN 51562-1
|
| Viskozite indeksi VI | 148 | DIN ISO 2909 |
148
DIN ISO 2909
|
|
| Qotish harorati | °C | -42 | DIN ISO 3016 |
-42
°C
DIN ISO 3016
|
| Yong‘in chiqish harorati | °C | 232 | DIN EN ISO 2592 |
232
°C
DIN EN ISO 2592
|
| Ruxsatnomalar | AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, DIN 51524-3, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, ISO 6743-4 HV, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump |
AFNOR 48-603 HV, Cetop RP 91H HV, Cincinnati Milacron P-68, Cincinnati Milacron P-69, Cincinnati Milacron P-70, DIN 51524-3, FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, ISO 6743-4 HV, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, U.S. Steel 127, U.S. Steel 136, Vickers Vane Pump
|
Точки смазки масленки
Для подшипников
RAVENOL Super EP-Langzeitfett — bu mineral asosli avtomobil surkovchi moy bo‘lib, litiyli sovun bilan qotirilgan va tarkibida antioksidant, korroziyaga qarshi hamda EP qo‘shimchalar mavjud. Bu qo‘shimchalar moylanadigan qismlarning xizmat muddatini uzaytiradi va aşinani kamaytiradi.
Одобрено производителем:
LOVAT LOV-204
- Доступная фасовка
- Параметры продукта
RAVENOL Super EP-Langzeitfett — bu mineral asosli avtomobil surkovchi moy bo‘lib, litiyli sovun bilan qotirilgan va tarkibida antioksidant, korroziyaga qarshi hamda EP qo‘shimchalar mavjud. Bu qo‘shimchalar moylanadigan qismlarning xizmat muddatini uzaytiradi va aşinani kamaytiradi.
U og‘ir yuklamali aylanuvchi va sirpanma podshipniklarini moylash uchun mo‘ljallangan, shu jumladan yuqori namlik, vibratsiya va zarbali yuklama sharoitida ham. Shuningdek, shassi, g‘ildirak podshipniklari, avtomobil, qurilish, sanoat va qishloq xo‘jaligi texnikasidagi kardanning sharnirlarini moylashda ham qo‘llanilishi mumkin.
Qo‘llaniladigan harorat diapazoni: -30°C dan +130°C gacha (qisqa muddatli yuklama ostida +150°C gacha). NLGI klassi 2. Almashtirish oralig‘i uzaytirilgan.
Super EP-Langzeitfett qo‘llanilishi quyidagilarni ta’minlaydi:
- Turli texnika turlari uchun universal qo‘llanilish imkoniyati
- A’lo EP xususiyatlari va aşinaga qarshi himoya
- Nam muhitda ham oksidlanish va korroziyaga qarshi samarali himoya
- Juda yaxshi mexanik barqarorlik
- Zo‘r darajadagi suvga chidamlilik
- Uzoq xizmat muddati va natijada almashtirish intervallarining kengayishi
- Qarishga nisbatan mukammal chidamlilik
- Past haroratlarda ham yaxshi nasoslanish xususiyati
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Mineral |
Mineral
|
||
| Ishlab chiqaruvchi tomonidan ma’qullangan | LOVAT LOV-204 |
LOVAT LOV-204
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51502 KP2K-30, ISO I6743-9: ISO-L-XCCFB2 |
DIN 51502 KP2K-30, ISO I6743-9: ISO-L-XCCFB2
|
||
| Rang | Jigarrang | ingl |
Jigarrang
ingl
|
|
| Qovushqoqlashtiruvchi modda | Litiyev sovun asosida | DIN 51757 |
Litiyev sovun asosida
DIN 51757
|
|
| NLGI-Class | 2 | DIN 51818 |
2
DIN 51818
|
|
| Mahsulotlar tasnifi | KP2K-30 | DIN 51502 |
KP2K-30
DIN 51502
|
|
| Ish harorati | °C | 0 | DIN 51825 |
0
°C
DIN 51825
|
| Ish harorati (qisqa muddatli) | °C | 130 | DIN 51757 |
130
°C
DIN 51757
|
| Penetratsiya | 60 aylanish | 265-295 | ISO 2137 |
265-295
60 aylanish
ISO 2137
|
| Korroziyadan himoya testi | namlik kamerasi | 1 | DIN 51802 |
1
namlik kamerasi
DIN 51802
|
| Tomchilash harorati | °C | 180 — | DIN ISO 2176 |
180 —
°C
DIN ISO 2176
|
| Misga korroziya testi | 120°C/24 soat | 1 | DIN 51811 |
1
120°C/24 soat
DIN 51811
|
| Suv o‘tkazmaslik (3 soat/90°C) | °C | 1-90 | DIN 51807-1 |
1-90
°C
DIN 51807-1
|
| VKA payvandlash yuklamasi | N | 2400 — 2600 | DIN 51350-4 |
2400 — 2600
N
DIN 51350-4
|
| Kinematik viskozite 40°C da | mm²/s | 130 | DIN 51562-1 |
130
mm²/s
DIN 51562-1
|
| Ruxsatnomalar | DIN 51502 KP2K-30, ISO I6743-9: ISO-L-XCCFB2, LOVAT LOV-204 |
DIN 51502 KP2K-30, ISO I6743-9: ISO-L-XCCFB2, LOVAT LOV-204
|
Для подшипников
RAVENOL Hot Red Grease HRG2 — bu qizil rangdagi avtomobil surkovchi moy bo‘lib, mineral bazaviy moy asosida ishlab chiqarilgan va litiyli sovun bilan qotirilgan. U avtomobillar, mexanizmlar, qurilmalar, konveyer tizimlari, qurilish texnikasi va boshqa uskunalarning sirpanma va aylanuvchi podshipniklarini moylash uchun mo‘ljallangan bo‘lib, yuqori haroratlarda ishlashga moslashtirilgan. Moy oqib ketishga barqaror, zang va korroziyaga qarshi himoyaga ega.
Одобрено производителем:
MAN 284 Li-H2, MB-Approval 265.1
Аналоги OEM:
BMW 83190447919, Land Rover STC3435, SWAG 10921909, VAG G052133A2, VAG G052133A2
- Доступная фасовка
- Параметры продукта
RAVENOL Hot Red Grease HRG2 — bu qizil rangdagi avtomobil surkovchi moy bo‘lib, mineral bazaviy moy asosida ishlab chiqarilgan va litiyli sovun bilan qotirilgan. U avtomobillar, mexanizmlar, qurilmalar, konveyer tizimlari, qurilish texnikasi va boshqa uskunalarning sirpanma va aylanuvchi podshipniklarini moylash uchun mo‘ljallangan bo‘lib, yuqori haroratlarda ishlashga moslashtirilgan. Moy oqib ketishga barqaror, zang va korroziyaga qarshi himoyaga ega.
RAVENOL Hot Red Grease HRG2 sanoatda ham, avtomobillarda ham universal surkovchi moy sifatida qo‘llanilishi mumkin.
Yuk avtomobillari podshipniklari va yuqori aylanish tezligidagi podshipniklarni moylash uchun ayniqsa mos keladi.
Hot Red Grease HRG2 qo‘llanilishi quyidagilarni ta’minlaydi:
- Universal qo‘llanilish imkoniyati
- Aşinaga qarshi himoya
- Mexanik va kimyoviy barqarorlik
- Korroziyaga qarshi himoya
- Metall yuzalarga a’lo yopishuvchanlik
- Oksidlanish va qarishga nisbatan chidamlilik
- Past haroratlarda ham yaxshi nasoslanish xususiyati
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Brand | RAVENOL |
RAVENOL
|
||
| Ishlab chiqaruvchi tomonidan ma’qullangan | MAN 284 Li-H2, MB-Approval 265.1 |
MAN 284 Li-H2, MB-Approval 265.1
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51502 KP2P-35, ISO 6743-9: ISO-L-XCEEB2 |
DIN 51502 KP2P-35, ISO 6743-9: ISO-L-XCEEB2
|
||
| Rang | Qizil | ingl |
Qizil
ingl
|
|
| Qovushqoqlashtiruvchi modda | Litiyev sovun asosida | DIN 51757 |
Litiyev sovun asosida
DIN 51757
|
|
| NLGI-Class | 2 | DIN 51818 |
2
DIN 51818
|
|
| Mahsulotlar tasnifi | KP2P-35 | DIN 51502 |
KP2P-35
DIN 51502
|
|
| Ish harorati | °C | 0 | DIN 51825 |
0
°C
DIN 51825
|
| Ish harorati (qisqa muddatli) | °C | 200 | DIN 51757 |
200
°C
DIN 51757
|
| Penetratsiya | 60 aylanish | 265-295 | ISO 2137 |
265-295
60 aylanish
ISO 2137
|
| Tomchilash harorati | °C | 260 — | DIN ISO 2176 |
260 —
°C
DIN ISO 2176
|
| Misga korroziya testi | 120°C/24 soat | 1 | DIN 51811 |
1
120°C/24 soat
DIN 51811
|
| Suv o‘tkazmaslik (3 soat/90°C) | °C | 1-90 | DIN 51807-1 |
1-90
°C
DIN 51807-1
|
| VKA payvandlash yuklamasi | N | 2600 — 2800 | DIN 51350-4 |
2600 — 2800
N
DIN 51350-4
|
| Kinematik viskozite 40°C da | mm²/s | 140 | DIN 51562-1 |
140
mm²/s
DIN 51562-1
|
| Ruxsatnomalar | DIN 51502 KP2P-35, ISO 6743-9: ISO-L-XCEEB2, MAN 284 Li-H2, MB 265.1 |
DIN 51502 KP2P-35, ISO 6743-9: ISO-L-XCEEB2, MAN 284 Li-H2, MB 265.1
|
Для подшипников
RAVENOL Arctic Green Grease AGG 2 - to‘liq sintetik, sintetik komponentlar (esterlar) asosida maxsus ishlab chiqilgan, mineral moy qo‘shilgan, zagustiteli litiy sovuniga asoslangan surkov moyidir.
- Доступная фасовка
- Параметры продукта
Объем:
1 kg
Артикул:
1340126-001
Объем:
25 kg
Артикул:
1340126-025
Объем:
180 kg
Артикул:
1340126-180
Объем:
200 g
Артикул:
1340126-200
RAVENOL Arctic Green Grease AGG 2 - to‘liq sintetik, sintetik komponentlar (esterlar) asosida maxsus ishlab chiqilgan, mineral moy qo‘shilgan, zagustiteli litiy sovuniga asoslangan surkov moyidir.
RAVENOL Arctic Green Grease AGG 2 silliq surilishga chidamlilik (mexanik barqarorlik), korroziya va zangga qarshi mukammal himoyani ta’minlaydi. U aylanuvchi va sirpanma podshipniklarni juda yuqori yuklama va juda past haroratlarda moylash uchun qo‘llaniladi. Maxsus qo‘shimchalar kompleksi tufayli doimiy foydalanishda yeyilish kamayadi va moylanayotgan mexanizmlarning xizmat muddati uzaytiriladi.
Uzluksiz ishlash rejimida RAVENOL Arctic Green Grease AGG 2 ning yuqori ish harorati +120 °C ni tashkil etadi. Qisqa muddatli ishlashda 160 °C dan oshirilishi tavsiya etilmaydi.
Yuqori haroratda qo‘llanilishi mahsulotning xizmat muddatini qisqartiradi. Surkov moyini muntazam qo‘shib borish uning xususiyatlarini saqlab qoladi va ekspluatatsion xarajatlarni kamaytiradi.
Qo‘llanilishi Arctic Green Grease AGG 2 quyidagilarni ta’minlaydi:
- Uzluksiz silliq surilishga chidamlilik
- Oksidlanishga chidamlilik
- Suv bilan yuvilib ketishga chidamlilik
- Yaxshi eskirishdan himoya
- Ekstremal haroratda yaxshi yuk ko‘tarish qobiliyati
- Yuqori bosim ostida ishlashga juda yuqori moslashuvchanlik
- Yaxshi yopishuvchanlik xususiyati
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | To‘liq sintetik |
To‘liq sintetik
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51502 KPE2K-60, ISO 6743-9: ISO-L-XECEB2 |
DIN 51502 KPE2K-60, ISO 6743-9: ISO-L-XECEB2
|
||
| Rang | Yashil | ingl |
Yashil
ingl
|
|
| Qovushqoqlashtiruvchi modda | Litiyev sovun asosida | DIN 51757 |
Litiyev sovun asosida
DIN 51757
|
|
| NLGI-Class | 2 | DIN 51818 |
2
DIN 51818
|
|
| Mahsulotlar tasnifi | KPE2K-60 | DIN 51502 |
KPE2K-60
DIN 51502
|
|
| Ish harorati | °C | 0 | DIN 51825 |
0
°C
DIN 51825
|
| Ish harorati (qisqa muddatli) | °C | 160 | DIN 51757 |
160
°C
DIN 51757
|
| Penetratsiya | 60 aylanish | 265-295 | ISO 2137 |
265-295
60 aylanish
ISO 2137
|
| Tomchilash harorati | °C | 180 — | DIN ISO 2176 |
180 —
°C
DIN ISO 2176
|
| Misga korroziya testi | 120°C/24 soat | 1 | DIN 51811 |
1
120°C/24 soat
DIN 51811
|
| Suv o‘tkazmaslik (3 soat/90°C) | °C | 1-90 | DIN 51807-1 |
1-90
°C
DIN 51807-1
|
| VKA payvandlash yuklamasi | N | 3000 — 3200 | DIN 51350-4 |
3000 — 3200
N
DIN 51350-4
|
| Kinematik viskozite 40°C da | mm²/s | 20 | DIN 51562-1 |
20
mm²/s
DIN 51562-1
|
| Ruxsatnomalar | DIN 51502 KPE2K-60, ISO 6743-9: ISO-L-XECEB2 |
DIN 51502 KPE2K-60, ISO 6743-9: ISO-L-XECEB2
|
Система охлаждения
Охлаждающая жидкость
RAVENOL TTC Traditional Technology Coolant Premix -40°C – tayyor antifriz bo‘lib, monoetilenglikol asosida ishlab chiqarilgan, tarkibida nitritlar, aminlar va fosfatlar mavjud emas. Dvigatel tarkibidagi barcha metall elementlar, shu jumladan alyuminiy va turli qotishmalarni uzoq muddat (5 yilgacha) korroziyaga qarshi himoya bilan ta’minlaydi.
Соответствие требованиям:
AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
- Доступная фасовка
- Параметры продукта
RAVENOL TTC Traditional Technology Coolant Premix -40°C – tayyor antifriz bo‘lib, monoetilenglikol asosida ishlab chiqarilgan, tarkibida nitritlar, aminlar va fosfatlar mavjud emas. Dvigatel tarkibidagi barcha metall elementlar, shu jumladan alyuminiy va turli qotishmalarni uzoq muddat (5 yilgacha) korroziyaga qarshi himoya bilan ta’minlaydi.
RAVENOL TTC Traditional Technology Coolant Premix -40°C sariq-yashil ftorlyuminesent rangga ega, bu esa defektoskop (ko‘k chiroq) yordamida antifrizning sizib chiqish ehtimoliy joylarini tez aniqlash imkonini beradi.
RAVENOL TTC - Protect C11 Premix -40ºC qo‘llanilishi quyidagilarni ta’minlaydi
- Yengil metallardan tayyorlangan dvigatellar uchun juda mos
- Yaxshi ishqoriy zaxira
- Korroziyaga qarshi optimal himoya uchun yuqori sifatli qo‘shimchalar
- Avtomobil radiatorlarida ishlatiladigan elastomerlar bilan moslik
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | AFNOR R15-601, ASTM D1384, ASTM D2570, ASTM D2809, ASTM D3306, ASTM D4985, ASTM D6210 Type 1-FF, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 NF, O Norm V 5123 (Österreich), SAE J1034, Suzuki, UNE 25-361 (Spanien), VW TL 774-C (entspricht G11) |
AFNOR R15-601, ASTM D1384, ASTM D2570, ASTM D2809, ASTM D3306, ASTM D4985, ASTM D6210 Type 1-FF, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 NF, O Norm V 5123 (Österreich), SAE J1034, Suzuki, UNE 25-361 (Spanien), VW TL 774-C (entspricht G11)
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| ASTM | D1384, D2570, D2809, D3306, D4985, D6210 Type 1-FF |
D1384, D2570, D2809, D3306, D4985, D6210 Type 1-FF
|
||
| Talablarga mos keladi | AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C |
AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
|
||
| Mos keladi | Suzuki |
Suzuki
|
||
| Zichlik 20°С da | g/cm³ | 1080 | EN ISO 12185 |
1080
g/cm³
EN ISO 12185
|
| Rang | Sariq-yashil | ingl |
Sariq-yashil
ingl
|
|
| 20°C da pH | 7,8 | ASTM D1287 |
7,8
ASTM D1287
|
|
| Muzlash harorati | °C | -40 | ASTM D1177 |
-40
°C
ASTM D1177
|
| Ruxsatnomalar | AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C |
AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
|
Охлаждающая жидкость
RAVENOL TTC - Protect C11 Concentrate – etilenglikol asosidagi antifriz kontsentrati bo‘lib, tarkibida nitritlar, aminlar va fosfatlar mavjud emas. Dvigatel tarkibidagi barcha metall elementlar, shu jumladan alyuminiy va turli qotishmalarni uzoq muddat (5 yilgacha) korroziyaga qarshi himoya bilan ta’minlaydi.
Соответствие требованиям:
AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
Аналоги OEM:
Alpine 0101141,
Alpine 0101142,
Alpine 0101143,
Alpine 0101144,
Alpine 0101145,
Alpine 101141,
Alpine 101142,
Alpine 101143,
Alpine 101144,
Alpine 101145,
Chrysler 04267020AA,
Chrysler 04267020AB,
Chrysler 04267020AC,
Chrysler 04267020AD,
Chrysler 04267020GA,
Chrysler 04267020GB,
Chrysler 04267020GC,
Chrysler 04267020GD,
Chrysler 4267020GA,
Chrysler 4267020GB,
Chrysler 4267020GD,
FEBI 02374,
FEBI 2374,
FEBI 88541,
Ford 1326830,
Ford CVC5,
Ford CVC7B2,
Ford VC5,
Ford VC7B,
Ford VC7D,
Ford VC7DILB
Alpine 0101141, Alpine 0101142, Alpine 0101143, Alpine 0101144, Alpine 0101145, Alpine 101141, Alpine 101142, Alpine 101143, Alpine 101144, Alpine 101145, Chrysler 04267020AA, Chrysler 04267020AB, Chrysler 04267020AC, Chrysler 04267020AD, Chrysler 04267020GA, Chrysler 04267020GB, Chrysler 04267020GC, Chrysler 04267020GD, Chrysler 4267020GA, Chrysler 4267020GB, Chrysler 4267020GD, FEBI 02374, FEBI 2374, FEBI 88541, Ford 1326830, Ford CVC5, Ford CVC7B2, Ford VC5, Ford VC7B, Ford VC7D, Ford VC7DILB, GM 19284967, GM 19375289, GM 19375290, GM 19375291, Nissan 7711170548, Renault 7711170548, Renault 7711428132, SsangYong 0000000242, Toyota 0888980042, Toyota 0888980043, VAG G0118ACA1, VAG N052774C0, Volvo 11715725, Volvo 11715726, Volvo 11715727, Volvo 11715727, Volvo 85108901, Volvo VOE11715725, Volvo VOE11715726
Внимание! Это концентрированный продукт. Перед использованием необходимо разбавить дистиллированной водой в пропорции 1:1.
- Доступная фасовка
- Параметры продукта
Объем:
10 L
Артикул:
1410100-010
Объем:
20 L, ecobox
Артикул:
1410100-B20
Объем:
60 L, bosilgan barrel
Артикул:
1410100-D60
Объем:
1 000 L
Артикул:
1410100-700
RAVENOL TTC - Protect C11 Concentrate – etilenglikol asosidagi antifriz kontsentrati bo‘lib, tarkibida nitritlar, aminlar va fosfatlar mavjud emas. Dvigatel tarkibidagi barcha metall elementlar, shu jumladan alyuminiy va turli qotishmalarni uzoq muddat (5 yilgacha) korroziyaga qarshi himoya bilan ta’minlaydi.
RAVENOL TTC - Protect C11 Concentrate sariq-yashil ftorlyuminesent rangga ega, bu esa defektoskop (ko‘k chiroq) yordamida ehtimoliy sizib chiqish joylarini tez aniqlash imkonini beradi.
RAVENOL TTC - Protect C11 Concentrate antifriz kontsentrati sof holda qo‘llanmasligi kerak, chunki sof etilenglikolning muzlash harorati atigi -15°C ni tashkil qiladi. Biroq, 20% suv qo‘shilganda muzlash harorati keskin pasayib -65°C ga yetadi.
Eng yaxshi natijaga antifriz kontsentrati RAVENOL Destilliertes Wasser entionisiert kabi deionizatsiyalangan suv bilan suyultirilganda erishiladi. Agar deionizatsiyalangan suv mavjud bo‘lmasa, odatdagi tozalangan suv bilan suyultirishga ham yo‘l qo‘yiladi.
Suyultirish nisbati va muzlash harorati:
| Himoya harorati (gacha) °C | % antifriz | % suv |
| -20°C | 35% | 65% |
| -37°C | 50% | 50% |
| -50°C | 60% | 40% |
RAVENOL TTC Protect C11 Concentrate qo‘llanilishi quyidagilarni ta’minlaydi:
- Yengil metallardan tayyorlangan dvigatellar uchun juda mos
- Yaxshi ishqoriy zaxira
- Korroziyaga qarshi optimal himoya uchun yuqori sifatli qo‘shimchalar
- Avtomobil radiatorlarida ishlatiladigan elastomerlar bilan moslik
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | AFNOR R15-601, ASTM D1384, ASTM D2809, ASTM D3306, ASTM D4340, ASTM D4985, ASTM D6210 Type 1-FF, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 NF, O Norm V 5123 (Österreich), SAE J1034, Suzuki, UNE 25-361 (Spanien), VW TL 774-C (entspricht G11) |
AFNOR R15-601, ASTM D1384, ASTM D2809, ASTM D3306, ASTM D4340, ASTM D4985, ASTM D6210 Type 1-FF, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 NF, O Norm V 5123 (Österreich), SAE J1034, Suzuki, UNE 25-361 (Spanien), VW TL 774-C (entspricht G11)
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| ASTM | D1384, D2809, D3306, D4340, D4985, D6210 Type 1-FF |
D1384, D2809, D3306, D4340, D4985, D6210 Type 1-FF
|
||
| Talablarga mos keladi | AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C |
AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
|
||
| Mos keladi | Suzuki |
Suzuki
|
||
| Zichlik 20°С da | g/cm³ | 1130 | EN ISO 12185 |
1130
g/cm³
EN ISO 12185
|
| Rang | Sariq-yashil | ingl |
Sariq-yashil
ingl
|
|
| Ishqoriy soni | mgKOH/g | — 20 | ASTM D1121 |
— 20
mgKOH/g
ASTM D1121
|
| Qaynatish harorati | °C | 155 | ASTM D1120 |
155
°C
ASTM D1120
|
| Suv miqdori | % | — 5 | ASTM D1123 |
— 5
%
ASTM D1123
|
| Yong‘in chiqish harorati | °C | 112 | DIN 51758 |
112
°C
DIN 51758
|
| Muzlash harorati (50% eritma) | °C | -37 | ASTM D1177 |
-37
°C
ASTM D1177
|
| pH ko‘rsatkichi (50% antifriz / 50% suv) | 8,4 | ASTM D1287 |
8,4
ASTM D1287
|
|
| Ruxsatnomalar | AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C |
AFNOR R15-601, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97 B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 Type NF, O Norm V 5123, SAE J 1034, UNE 25-361 (Spanien), VW TL 774-C
|
Охлаждающая жидкость
RAVENOL Fließverbesserer
Внимание! Это концентрированный продукт. Перед использованием необходимо разбавить дистиллированной водой в пропорции 1:1.
- Доступная фасовка
- Параметры продукта
can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of
RAVENOL Fließverbesserer
are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when
RAVENOL Fließverbesserer
is used (this is given when the goods are stored in an underground tank!).
RAVENOL Fließverbesserer
itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.
RAVENOL Fließverbesserer
will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of
RAVENOL Fließverbesserer
into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of
RAVENOL Fließverbesserer
has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added
RAVENOL Fließverbesserer
(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the
RAVENOL Fließverbesserer
reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!
| Параметр | Ед. изм | Значение | Тестирование |
|---|
Для аккумуляторов
RAVENOL Destilliertes Wasser (entionisiert) — maxsus tayyorlangan distillangan, deionizatsiyalangan suv. Ionlar mavjud emas. VDE talablarga javob beradi. Rossiya va xorijiy ishlab chiqaruvdagi barcha turdagi akkumulyatorlar uchun juda mos. Maishiy sharoitda bug‘li dazmollar, akvariumlar va hokazo uchun foydalanish mumkin.Oddiy distillangan suvdan farqli o‘laroq, ion almashuvchi smolalar orqali chuqur tozalangan.
Соответствие требованиям:
DIN 43530-4, DIN EN 50272
Аналоги OEM:
BMW 83190394350, BMW 83190394350
- Доступная фасовка
- Параметры продукта
RAVENOL Destilliertes Wasser (entionisiert) — maxsus tayyorlangan distillangan, deionizatsiyalangan suv. Ionlar mavjud emas. VDE talablarga javob beradi. Rossiya va xorijiy ishlab chiqaruvdagi barcha turdagi akkumulyatorlar uchun juda mos. Maishiy sharoitda bug‘li dazmollar, akvariumlar va hokazo uchun foydalanish mumkin.
Oddiy distillangan suvdan farqli o‘laroq, ion almashuvchi smolalar orqali chuqur tozalangan.
Quyidagi talablarga mos keladi:
DIN 57 510 VDE – akkumulyatorlar va batareyalar uchun.
DIN 43 530 4-qism – akkumulyator elektrolitlari, qo‘rg‘oshinli va ishqoriy akkumulyatorlar uchun.
Qo‘llanilishi: RAVENOL Destilliertes Wasser (entionisiert) antifriz kontsentratini suyultirish, shuningdek radiatorlar, bug‘li dazmollar va akvariumlar uchun (suv qattiqligini kamaytirish) ishlatiladi.
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | DIN 43 530-4 Akkumulatoren, DIN EN 50272, Elektrolyt und Nachfüllwasser |
DIN 43 530-4 Akkumulatoren, DIN EN 50272, Elektrolyt und Nachfüllwasser
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Talablarga mos keladi | DIN 43530-4, DIN EN 50272 |
DIN 43530-4, DIN EN 50272
|
||
| Ruxsatnomalar | DIN 43530-4, DIN EN 50272 |
DIN 43530-4, DIN EN 50272
|
