Поиск по VIN, марке, модели, типу техники или названию агрегата, по артикулу любого масла:
Holder A-Trac 7.80P, год выпуска с 2010 - Моторное масло, акпп, трансмиссионное масло, антифриз, тормозная жидкость, жидкость гур (гидроусилителя) и другие жидкости.
Топливо: Дизельное топливо
Привод: на все колеса
Двигатель: Однорядный
Количество цилиндров: 4
Клапанов на цилиндров: 4
Рабочий объем: 3619 куб. см.
Мощность: 77 л.с. / 57 кВт
Коробка передач спереди
Для тракторов
RAVENOL Fließverbesserer
- Параметры продукта
can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of
RAVENOL Fließverbesserer
are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when
RAVENOL Fließverbesserer
is used (this is given when the goods are stored in an underground tank!).
RAVENOL Fließverbesserer
itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.
RAVENOL Fließverbesserer
will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of
RAVENOL Fließverbesserer
into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of
RAVENOL Fließverbesserer
has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added
RAVENOL Fließverbesserer
(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the
RAVENOL Fließverbesserer
reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!
| Параметр | Ед. изм | Значение | Тестирование |
|---|
Редуктор пониженной скорости
Для тракторов
RAVENOL Fließverbesserer
- Параметры продукта
can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of
RAVENOL Fließverbesserer
are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when
RAVENOL Fließverbesserer
is used (this is given when the goods are stored in an underground tank!).
RAVENOL Fließverbesserer
itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.
RAVENOL Fließverbesserer
will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of
RAVENOL Fließverbesserer
into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of
RAVENOL Fließverbesserer
has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added
RAVENOL Fließverbesserer
(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the
RAVENOL Fließverbesserer
reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!
| Параметр | Ед. изм | Значение | Тестирование |
|---|
Гидравлическая система сцепления
Для тормозной системы
RAVENOL DOT 4 – Germaniyada ishlab chiqarilgan, yuqori sifatli tormoz suyuqligi bo‘lib, bor kislotasining yuqori molekulali efirlari aralashmasi asosida tayyorlangan va yuqori samarali antioksidlovchi qo‘shimchalar, korroziyaga qarshi inhibitörlar hamda muhrlar va elastomerlarning shishishini oldini oluvchi qo‘shimchalar bilan boyitilgan.
- Доступная фасовка
- Параметры продукта
DOT 4
RAVENOL DOT 4 – Germaniyada ishlab chiqarilgan, yuqori sifatli tormoz suyuqligi bo‘lib, bor kislotasining yuqori molekulali efirlari aralashmasi asosida tayyorlangan va yuqori samarali antioksidlovchi qo‘shimchalar, korroziyaga qarshi inhibitörlar hamda muhrlar va elastomerlarning shishishini oldini oluvchi qo‘shimchalar bilan boyitilgan.
RAVENOL DOT 4 tormoz suyuqligi FMVSS (Federal Motor Vehicle Safety Standard) №116 DOT3 va DOT4 sifat darajasini talab qiluvchi avtomobil tormoz tizimlarida qo‘llash uchun mo‘ljallangan. RAVENOL DOT 4 tormoz suyuqligini mineral asosdagi tormoz suyuqliklari bilan, masalan, Citroen LHM+ bilan aralashtirish taqiqlanadi.
Quyidagi spetsifikatsiyalarga mos: SAE J1704, ISO 4925, FMVSS 116 DOT4
DOT 4 quyidagilarni ta’minlaydi:
- ABS tizimi bilan jihozlangan tizimlarning ishonchli ishlashi
- Kimyoviy barqarorlik
- Yaxshilangan moylash xususiyatlari
- Butlovchi qismlarga nisbatan neytral ta’sir
- Past haroratlarda ham oquvchanlik
- Xuddi shu spetsifikatsiyadagi barcha tormoz suyuqliklari bilan moslik
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| FMVSS 116 (DOT) spetsifikatsiyalari | DOT-4 |
DOT-4
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Sintetik |
Sintetik
|
||
| Spetsifikatsiyalarga mos keladi | DOT 4, ISO 4925 Class 4, SAE J 1704 |
DOT 4, ISO 4925 Class 4, SAE J 1704
|
||
| Zichlik 20°С da | g/cm³ | 1052 | EN ISO 12185 |
1052
g/cm³
EN ISO 12185
|
| Rang | Och sariq | ingl |
Och sariq
ingl
|
|
| 100°C da yopishqoqlik | mPa*s | 2.41 | ASTM D445 |
2.41
mPa*s
ASTM D445
|
| Viskozite -40°C da | cSt | 1340 | ASTM D445 |
1340
cSt
ASTM D445
|
| Qaynatish harorati | °C | 271 | FMVSS 116 |
271
°C
FMVSS 116
|
| “Namlangan suyuqlik”ning qaynash harorati | °C | 169 | FMVSS 116 |
169
°C
FMVSS 116
|
| Yuqori haroratda barqarorlik | °C | -1 | FMVSS 116 |
-1
°C
FMVSS 116
|
| Kimyoviy barqarorlik | °C | 1 | FMVSS 116 |
1
°C
FMVSS 116
|
| Bug‘lanish | %w/w | 61 | FMVSS 116 |
61
%w/w
FMVSS 116
|
| -40°С da oqimlilik | i.O., 4s | FMVSS 116 |
i.O., 4s
FMVSS 116
|
|
| -50°С da oqimlilik | i.O., 8s | FMVSS 116 |
i.O., 8s
FMVSS 116
|
|
| -40°C da gigroskopiklik | shaffof, 3ѕ | FMVSS 116 |
shaffof, 3ѕ
FMVSS 116
|
|
| +60°C da gigroskopiklik | Shaffof | FMVSS 116 |
Shaffof
FMVSS 116
|
|
| -40°С da aralashuv | Shaffof | FMVSS 116 |
Shaffof
FMVSS 116
|
|
| +60°С da aralashuv | Shaffof | FMVSS 116 |
Shaffof
FMVSS 116
|
|
| Suv miqdori | % | — 0.2 | DIN 51777-1 |
— 0.2
%
DIN 51777-1
|
| Galvanizlangan temir | Δ mg/cm² | 0.04 | FMVSS 116 |
0.04
Δ mg/cm²
FMVSS 116
|
| Korroziyaga chidamlilik | Po‘lat | -0.01 | FMVSS 116 |
-0.01
Po‘lat
FMVSS 116
|
| Oksidlanishga chidamlilik | Alyuminiy | 0.02 | FMVSS 116 |
0.02
Alyuminiy
FMVSS 116
|
| Korroziyaga chidamlilik | Quyma temir | -0,03 | FMVSS 116 |
-0,03
Quyma temir
FMVSS 116
|
| Korroziyaga chidamlilik | Guruch (latun) | -0.08 | FMVSS 116 |
-0.08
Guruch (latun)
FMVSS 116
|
| Korroziyaga chidamlilik | Mis | -0.05 | FMVSS 116 |
-0.05
Mis
FMVSS 116
|
| Korroziyaga chidamlilik Tsink | mg/cm² | 0.01 | FMVSS 116 |
0.01
mg/cm²
FMVSS 116
|
| Cho‘kma ajralishi | % | — 0.05 | FMVSS 116 |
— 0.05
%
FMVSS 116
|
| pH ko‘rsatkichi | 8.2 | FMVSS 116 |
8.2
FMVSS 116
|
|
| Rezinaning diametr o‘zgarishi | 0.16 | FMVSS 116 |
0.16
FMVSS 116
|
|
| Qattiqlik o‘zgarishi | °IRHD | -4 | FMVSS 116 |
-4
°IRHD
FMVSS 116
|
| Tashqi ko‘rinish | i.O. | FMVSS 116 |
i.O.
FMVSS 116
|
|
| SBR rezinasiga chidamlilik | 70°С da | 0.56 | FMVSS 116 |
0.56
70°С da
FMVSS 116
|
| SBR rezinasiga chidamlilik | 120°С da | 0.73 | FMVSS 116 |
0.73
120°С da
FMVSS 116
|
| EPDM rezinasiga chidamlilik | 70°С da (SAE J1703 bo‘yicha) | -2 | FMVSS 116 |
-2
70°С da (SAE J1703 bo‘yicha)
FMVSS 116
|
| EPDM rezinasiga chidamlilik | 120°С da | -2 | FMVSS 116 |
-2
120°С da
FMVSS 116
|
| Rezinaga chidamlilik | 70°С da tabiiy sharoitda (ISO 4925 bo‘yicha talab) | 0.38 | FMVSS 116 |
0.38
70°С da tabiiy sharoitda (ISO 4925 bo‘yicha talab)
FMVSS 116
|
| Ruxsatnomalar | DOT 4, ISO 4925 Class 4, SAE J 1704 |
DOT 4, ISO 4925 Class 4, SAE J 1704
|
Блок передачи заднего хода
Для тракторов
RAVENOL Fließverbesserer
- Параметры продукта
can be mixed and is compatible with all diesel fuels (except Biodiesel) as well as fuel oils EL. Hi gher dosings as recommended are harmless. Demixing won’t occur.Practical experiences show that unde r consideration of the diferent kind of diesel fuels and fuel oils EL offered on the market followin g cold properties are given. With different manufacturers of diesel fuel, the effect can vary.Ad dition: Liter RavenolFließverbesserer to LiterDiesel fuel respectively fuel oil ELOperating temp eratureSummer-Diesel fuel as well as fuel oil EL1 : 1000 *)- 10°C2 : 1000- 18°C 3 : 1000- 23°C4 : 1000- 25°CWinter-Diesel-fuel1 : 1000- 25°C2 : 100 0- 28°C3 : 1000- 31°C*) The cold properties depend on the used DK respectively fuel o il EL. When admixing in a ratio of 1:1000 normally an improvement of the cold properties by 5°C to 1 0°C are possible.Characteristics:The basic advantages of
RAVENOL Fließverbesserer
are:complete restless burningno erosion of the flammabilityno change of the hazard categoryno r eduction of the viscosity, no illegal wastage in the pumpApplication note:Diesel fuel and fuel o il EL must have a temperature of more than 5°C when
RAVENOL Fließverbesserer
is used (this is given when the goods are stored in an underground tank!).
RAVENOL Fließverbesserer
itself must have a temperature of more than 0°C in case of use. Therefore, don’t store it outside.
RAVENOL Fließverbesserer
will become viscous below 0°C – this will not influence the product quality.Please follow!In or der to guarantee an optimum mixing the diesel fuel should have a temperature of more than 0°C and th e fuel oil EL more than 5°C. As the average temperatures are between 6°C and 9°C in case of a normal underground tank storage and diesel fuel and fuel oil EL are normally delivered with higher tempera tures than the annual average it satisfies to pour the necessary quantity of
RAVENOL Fließverbesserer
into the fixed tank or vehicle tank before the vehicle is fuelled. The “splash” during the filling of the vehicle secures the necessary stable mixing.Concerning overground positioned tanks approxim ately the half of diesel fuel or fuel oil quantity should be poured during the filling. If there is a deposit in the tank before filling a mixing with a temperature of more than 0°C can be secured. T hen the necessary quantity of
RAVENOL Fließverbesserer
has to be poured and afterwards the second half of diesel fuel or fuel oil has to be tanked.After having added
RAVENOL Fließverbesserer
(after having fuelled!) the engine of vehicles and working machines has to run approximately 10 min utes. Hereby it is secured that the
RAVENOL Fließverbesserer
reaches the fuel filter and the injection pump and can be effective there. This prevents starting p roblems.ATTENTION!Before use in common rail or pump injector vehicles be sure to read the operati ng instructions of the vehicle and follow the instructions of the vehicle manufacturer!
| Параметр | Ед. изм | Значение | Тестирование |
|---|
Гидравлическая система
Тракторное масло
RAVENOL STOU SAE 10W-40 universal mineral traktor moyi bo'lib, qishloq xo'jaligi texnikasi, ekskavatorlar va qurilish texnikasi uchun mo'ljallangan, yuqori sifatli, erituvchilardan tozalangan mineral asos moyi asosida ishlab chiqilgan. Bu professional yondashuvni talab qiladigan maxsus mahsulotdir. Suyuqlikni tanlash, uni almashtirish tartibi va davriyligi bo'yicha ishlab chiqaruvchi tavsiyalariga rioya qiling.
Соответствие требованиям:
Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (MB 228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 68 HVLP, ISO VG 100 HVLP, John Deere J20 C, John Deere J27, Kompressorenöl: Holman Compair Kompressor, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
- Доступная фасовка
- Параметры продукта
Объем:
5 L
Артикул:
1310111-005
Объем:
10 L
Артикул:
1310111-010
Объем:
20 L, ecobox
Артикул:
1310111-B20
Объем:
60 L
Артикул:
1310111-060
Объем:
208 L
Артикул:
1310111-208
Объем:
1 000 L
Артикул:
1310111-700
Объем:
208 L, bosilgan barrel
Артикул:
1310111-D28
RAVENOL STOU SAE 10W-40 universal mineral traktor moyi bo'lib, qishloq xo'jaligi texnikasi, ekskavatorlar va qurilish texnikasi uchun mo'ljallangan, yuqori sifatli, erituvchilardan tozalangan mineral asos moyi asosida ishlab chiqilgan. Bu professional yondashuvni talab qiladigan maxsus mahsulotdir. Suyuqlikni tanlash, uni almashtirish tartibi va davriyligi bo'yicha ishlab chiqaruvchi tavsiyalariga rioya qiling.
RAVENOL STOU SAE 10W-40 zamonaviy traktor texnikasining dvigatellari, transmissiyalari va gidravlik tizimlari uchun qo'llaniladi. Yuqori sifatli asos moyi va maxsus tanlangan qo'shimchalar paketi texnikaning yil bo'yi uzluksiz ishlashini kafolatlaydi.
Qo'llanilishi:
RAVENOL STOU SAE 10W-40 zamonaviy traktor texnikasining dvigatellari, transmissiyalari va gidravlik tizimlarida qo'llaniladi.
RAVENOL STOU SAE 10W-40 bitta moylash materialining barcha uzellarda universal qo'llanilishini ta'minlaydi: turboquvvatlagichli va turboquvvatlagichsiz benzin va dizel dvigatellari uchun motor moyi sifatida, transmissiya moyi sifatida (shu jumladan ho'l tormoz tizimlari) va gidravlik moy sifatida.
RAVENOL STOU SAE 10W-40 kompressor moyi sifatida ham qo'llanilishi mumkin.
Afzalliklari va xususiyatlari:
RAVENOL STOU SAE 10W-40 quyidagilarni ta'minlaydi:
- Yuqori detargent va dispersiyalovchi xususiyatlar
- Yeyilish, korroziya va ko'pik hosil bo'lishidan uzoq muddatli himoya
- Oksidlanishga yuqori chidamlilik
- Yuqori bosim ostida ajoyib xususiyatlar
- Yuqori va barqaror yopishqoqlik indeksi
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | 80W-90, 85W, 85W-90, ACEA E3, Allison C4, API CG-4/SF, API GL-4, Atlas Copco Kompressoren, Case IH-MS 1209, Caterpillar TO-2, DTFR 15B110 (228.3), FENDT KDM 41.2011, Ford ESN-M2C-134 B, Ford ESN-M2C-134 C, Ford ESN-M2C-134 D, Ford ESN-M2C-159 B, Ford ESN-M2C-159 C, Getriebeöl: SAE 80W, Holman CompAir Kompressoren, Hydrauliköl: HVLP ISO VG 68-100, John Deere J20C, John Deere J27, John Deere Spezialtraktorenöl: J20C, MAN 271, Massey Ferguson M1139, Massey Ferguson M1144, Massey Ferguson M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Motorenöl: SAE 10W-40, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B |
80W-90, 85W, 85W-90, ACEA E3, Allison C4, API CG-4/SF, API GL-4, Atlas Copco Kompressoren, Case IH-MS 1209, Caterpillar TO-2, DTFR 15B110 (228.3), FENDT KDM 41.2011, Ford ESN-M2C-134 B, Ford ESN-M2C-134 C, Ford ESN-M2C-134 D, Ford ESN-M2C-159 B, Ford ESN-M2C-159 C, Getriebeöl: SAE 80W, Holman CompAir Kompressoren, Hydrauliköl: HVLP ISO VG 68-100, John Deere J20C, John Deere J27, John Deere Spezialtraktorenöl: J20C, MAN 271, Massey Ferguson M1139, Massey Ferguson M1144, Massey Ferguson M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, Motorenöl: SAE 10W-40, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
|
||
| Viskozite | 10W-40 |
10W-40
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| API | CG-4, GL-4, SF |
CG-4, GL-4, SF
|
||
| ACEA | E3 |
E3
|
||
| Talablarga mos keladi | Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B |
Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
|
||
| Mos keladi | Atlas Copco Kompressoren, Holman CompAir Kompressoren |
Atlas Copco Kompressoren, Holman CompAir Kompressoren
|
||
| Mahsulotlarga mos keladi | John Deere J20 C, John Deere J20C, John Deere J27 |
John Deere J20 C, John Deere J20C, John Deere J27
|
||
| Zichlik 20°С da | g/cm³ | 864 | EN ISO 12185 |
864
g/cm³
EN ISO 12185
|
| Rang | Sariq-jigarrang | ingl |
Sariq-jigarrang
ingl
|
|
| Viskozite 100°С da | mm²/s | 14.7 | DIN 51659-2 |
14.7
mm²/s
DIN 51659-2
|
| Viskozite 40°С da | mm²/s | 101.1 | DIN 51659-2 |
101.1
mm²/s
DIN 51659-2
|
| Viskozite indeksi VI | 151 | DIN ISO 2909 |
151
DIN ISO 2909
|
|
| Qotish harorati | °C | -33 | DIN ISO 3016 |
-33
°C
DIN ISO 3016
|
| Yong‘in chiqish harorati | °C | 234 | DIN EN ISO 2592 |
234
°C
DIN EN ISO 2592
|
| Ishqoriy son | mgKOH/g | 12.4 | ASTM D2896 |
12.4
mgKOH/g
ASTM D2896
|
| Sulfatli kul miqdori | %wt. | 1.45 | DIN 51575 |
1.45
%wt.
DIN 51575
|
| Ruxsatnomalar | Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B |
Allison C-4, Case IH MS 1209, Caterpillar TO-2, DTFR 15B110 (228.3), FENDT KDM 41.2011, Ford ESN-M2C 134-B, Ford ESN-M2C 134-C, Ford ESN-M2C 134-D, Ford ESN-M2C 159-B, Ford ESN-M2C 159-C, ISO VG 100 HVLP, ISO VG 68 HVLP, MAN 271, Massey Ferguson CMS M1139, Massey Ferguson CMS M1144, Massey Ferguson CMS M1145, MAT 3525, MB 227.1, MB 228.1, MB 228.3, MIL-L-2104 D, New Holland NH 410B, ZF TE-ML 06A, ZF TE-ML 06B, ZF TE-ML 06C, ZF TE-ML 06D, ZF TE-ML 07B
|
Гидравлическое масло
RAVENOL Hydraulikoel TS 46 (HLP) – HLP sinfidagi mineral gidravlik moy. Yuqori sifatli asos moyi va maxsus qo'shimchalar kompleksi qo'llanilishi tufayli yaxshi yopishqoqlik-harorat xususiyatlari va yuqori yuklamalarda korroziya va yeyilishdan ishonchli himoya, shuningdek, zichlatuvchi materiallarga neytral munosabat ta'minlanadi.
Соответствие требованиям:
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 91H HM, Cetop RP 2950-S, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, GM LH-02-1-04, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, Vickers Pumpentest, ZF TE-ML 07H
SAE: 46
Аналоги OEM:
Alpine 0100843, Alpine 0100844, Alpine 0100845, GM 88861680, GM 88861680
- Доступная фасовка
- Параметры продукта
Объем:
1 L
Артикул:
1323105-001
Объем:
10 L
Артикул:
1323105-010
Объем:
20 L, ecobox
Артикул:
1323105-B20
Объем:
208 L, bosilgan barrel
Артикул:
1323105-D28
RAVENOL Hydraulikoel TS 46 (HLP) – HLP sinfidagi mineral gidravlik moy. Yuqori sifatli asos moyi va maxsus qo'shimchalar kompleksi qo'llanilishi tufayli yaxshi yopishqoqlik-harorat xususiyatlari va yuqori yuklamalarda korroziya va yeyilishdan ishonchli himoya, shuningdek, zichlatuvchi materiallarga neytral munosabat ta'minlanadi.
RAVENOL Hydraulikoel TS 46 (HLP) gidravlik moyi qurilish va karyer texnikasining gidravlik tizimlarida, yuqori bosimli nasoslarda, shuningdek, kichik mexanizmlarga xizmat ko'rsatishda va yopiq tizimlarda ish suyuqligi sifatida universal qo'llaniladi.
Hydraulikoel TS 46 (HLP) qo'llanilishi quyidagilarni ta'minlaydi:
- Yuqori unumdorlik darajasi
- Yaxshi yopishqoqlik-harorat xususiyatlari
- Yeyilishga barqarorlik
- Ajoyib yeyilishdan himoya
- Uzoq muddatli korroziyadan himoya
- Rezina zichlatgichlarga neytrallik
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | AFNOR NFE 48-603 HM, Arburg, ASTM D6158, Atos, Bosch Rexroth RE 90220, CETOP RP 2950-S, CETOP RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG-Test A 8,3/90, GB 111118.1 L-HM (conventional), GM LH-02-1-04, ISO 11158 HM, JCMAS HK, LS-2, Metso, MIL-PRF-17672 E, Müller Weingarten, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, US Steel 126, US Steel 127, US Steel 136, VDMA 24318, Verwendung lt. Betriebsanleitung, Vickers Pumpentest, ZF TE-ML 07H |
AFNOR NFE 48-603 HM, Arburg, ASTM D6158, Atos, Bosch Rexroth RE 90220, CETOP RP 2950-S, CETOP RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG-Test A 8,3/90, GB 111118.1 L-HM (conventional), GM LH-02-1-04, ISO 11158 HM, JCMAS HK, LS-2, Metso, MIL-PRF-17672 E, Müller Weingarten, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, US Steel 126, US Steel 127, US Steel 136, VDMA 24318, Verwendung lt. Betriebsanleitung, Vickers Pumpentest, ZF TE-ML 07H
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Viskozite | 46 |
46
|
||
| Turi | Mineral |
Mineral
|
||
| ASTM | D6158 |
D6158
|
||
| Talablarga mos keladi | AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 2950-S, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, ZF TE-ML 07H |
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 2950-S, Cetop RP 91H HM, Danieli Hydraulics, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, ISO 11158 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, ZF TE-ML 07H
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51524-2, ISO 6743-4 HM |
DIN 51524-2, ISO 6743-4 HM
|
||
| Mos keladi | Arburg, Atos, Metso, Vickers Pumpentest |
Arburg, Atos, Metso, Vickers Pumpentest
|
||
| Mahsulotlarga mos keladi | GM LH-02-1-04 |
GM LH-02-1-04
|
||
| Zichlik 20°С da | g/cm³ | 857 | EN ISO 12185 |
857
g/cm³
EN ISO 12185
|
| Rang | Och sariq | ingl |
Och sariq
ingl
|
|
| Viskozite 100°С da | mm²/s | 7.2 | DIN 51659-2 |
7.2
mm²/s
DIN 51659-2
|
| Viskozite 40°С da | mm²/s | 47 | DIN 51659-2 |
47
mm²/s
DIN 51659-2
|
| Viskozite indeksi VI | 113 | DIN ISO 2909 |
113
DIN ISO 2909
|
|
| Qotish harorati | °C | -27 | DIN ISO 3016 |
-27
°C
DIN ISO 3016
|
| Yong‘in chiqish harorati | °C | 238 | DIN EN ISO 2592 |
238
°C
DIN EN ISO 2592
|
| Emulsiyaga chidamlilik testi | 30 daq. maksimum 54/82°С | 40ml/40ml/10min. | DIN 51757 |
40ml/40ml/10min.
30 daq. maksimum 54/82°С
DIN 51757
|
| Eskirish – SSR | % | 2000 | DIN 51587 |
2000
%
DIN 51587
|
| Tishli uzatma yog‘ining yeyilishga chidamliligini aniqlash testi | %wt. | 12 | DIN 51354/2 |
12
%wt.
DIN 51354/2
|
| Ruxsatnomalar | AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 2950-S, Cetop RP 91H HM, Danieli Hydraulics, DIN 51524-2, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, ISO 11158 HM, ISO 6743-4 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, ZF TE-ML 07H |
AFNOR NFE 48-603 HM, Bosch Rexroth RE 90220, Cetop RP 2950-S, Cetop RP 91H HM, Danieli Hydraulics, DIN 51524-2, Eaton Vickers I-286-S, Fives Cincinnati P-55, Fives Cincinnati P-70, FZG Test A 8,3/90, GB 111118.1 L-HM, ISO 11158 HM, ISO 6743-4 HM, JCMAS HK, MIL-PRF-17672 E, Müller, NATO H-573, Parker Denison HF-0, Parker Denison HF-1, Parker Denison HF-2, SAE MS 1004 HM, Sauer-Danfoss 520L0463, SEB 181.222, U.S. Steel 126, U.S. Steel 127, U.S. Steel 136, VDMA 24318, ZF TE-ML 07H
|
Для гидравлики
RAVENOL BIO-Hydraulikoel HEES 46 is based on synthetic, easily biodegradable esters and a powerful, environmentally friendly combination of additives which gives the product excellent properties regarding oxidation stability, corrosion, low temperatures as well as EP behaviour.
Соответствие требованиям:
JCMAS P042 HKB, Parker Denison HF-1, Parker Denison HF-2, Parker Denison HF-6, US Vessel General Permit (VGP), VDMA 24568, VDMA 24570
SAE: 46
- Доступная фасовка
- Параметры продукта
Объем:
20 L
Артикул:
1321105-020
Объем:
20 L, ecobox
Артикул:
1321105-B20
Объем:
60 L
Артикул:
1321105-060
Объем:
208 L
Артикул:
1321105-208
Объем:
1 000 L
Артикул:
1321105-700
Compared with products of vegetable triglyceride base, RAVENOL BIO-Hydraulikoel HEES 46 has much better high temperature oxidation stability.
RAVENOL BIO-Hydraulikoel HEES 46 can be used year-round due to its outstanding low-temperature behaviour and provides excellent wear and corrosion protection.
Application Note
RAVENOL BIO-Hydraulikoel HEES 46 is used wherever there is the danger of hydraulic fluid leaking into the ground-or waste water. This includes all equipment operating in or near areas of water purification or water protection or near surface water, such as e.g. sewage treatment plants, dredging ships and floating dredges, lock hydraulics and river weirs, pipe and tunnel driving machines, hydraulic aggregates in forests and on fields, earth moving machines in water and forestry machines.
Characteristics
- Biodegradability
- Excellent corrosion protection
- Outstanding cold behaviour
- Excellent oxidation stability
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Tavsiyalar | JCMAS P042 HKB, Parker Denison HF-1, Parker Denison HF-2, Parker Denison HF-6 (Dry ASTM D4310), US Vessel General Permit (VGP), VDMA 24568, VDMA 24570 |
JCMAS P042 HKB, Parker Denison HF-1, Parker Denison HF-2, Parker Denison HF-6 (Dry ASTM D4310), US Vessel General Permit (VGP), VDMA 24568, VDMA 24570
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Viskozite | 46 |
46
|
||
| Turi | To‘liq sintetik |
To‘liq sintetik
|
||
| Talablarga mos keladi | JCMAS P042 HKB, Parker Denison HF-1, Parker Denison HF-2, Parker Denison HF-6, US Vessel General Permit (VGP), VDMA 24568, VDMA 24570 |
JCMAS P042 HKB, Parker Denison HF-1, Parker Denison HF-2, Parker Denison HF-6, US Vessel General Permit (VGP), VDMA 24568, VDMA 24570
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51524-1, DIN 51524-2, DIN 51524-3, Eaton Brochure 03-401-2010, ISO 15380 HEES (Dry ISO 4263-3) |
DIN 51524-1, DIN 51524-2, DIN 51524-3, Eaton Brochure 03-401-2010, ISO 15380 HEES (Dry ISO 4263-3)
|
||
| Zichlik 20°С da | g/cm³ | 917 | EN ISO 12185 |
917
g/cm³
EN ISO 12185
|
| Rang | Sariq | ingl |
Sariq
ingl
|
|
| Viskozite 100°С da | mm²/s | 9.45 | DIN 51659-2 |
9.45
mm²/s
DIN 51659-2
|
| Viskozite 40°С da | mm²/s | 46 | DIN 51659-2 |
46
mm²/s
DIN 51659-2
|
| Viskozite indeksi VI | 190 | DIN ISO 2909 |
190
DIN ISO 2909
|
|
| Qotish harorati | °C | -36 | DIN ISO 3016 |
-36
°C
DIN ISO 3016
|
| Yong‘in chiqish harorati | °C | 296 | DIN EN ISO 2592 |
296
°C
DIN EN ISO 2592
|
| Ko‘pik hosil bo‘lishi I | 24°С da | 10/0 | ASTM D892 |
10/0
24°С da
ASTM D892
|
| Ko‘pik hosil bo‘lishi II | 93.5°C da | 5/0 | ASTM D892 |
5/0
93.5°C da
ASTM D892
|
| Ko‘pik hosil bo‘lishi III | 24°С dan 93.5°C gacha | 10/0 | ASTM D892 |
10/0
24°С dan 93.5°C gacha
ASTM D892
|
| Misga nisbatan korroziya testi | 121°С / 3 soat | 1a | ASTM D130 |
1a
121°С / 3 soat
ASTM D130
|
| Havoni ajratish qobiliyati (50°C da) | 2 | DIN ISO 9120 |
2
DIN ISO 9120
|
|
| Ruxsatnomalar | DIN 51524-1, DIN 51524-2, DIN 51524-3, Eaton Brochure 03-401-2010, ISO 15380 HEES (Dry ISO 4263-3), JCMAS P042 HKB, Parker Denison HF-1, Parker Denison HF-2, Parker Denison HF-6, US Vessel General Permit (VGP), VDMA 24568, VDMA 24570 |
DIN 51524-1, DIN 51524-2, DIN 51524-3, Eaton Brochure 03-401-2010, ISO 15380 HEES (Dry ISO 4263-3), JCMAS P042 HKB, Parker Denison HF-1, Parker Denison HF-2, Parker Denison HF-6, US Vessel General Permit (VGP), VDMA 24568, VDMA 24570
|
Точки смазки масленки
Для подшипников
RAVENOL Super EP-Langzeitfett — bu mineral asosli avtomobil surkovchi moy bo‘lib, litiyli sovun bilan qotirilgan va tarkibida antioksidant, korroziyaga qarshi hamda EP qo‘shimchalar mavjud. Bu qo‘shimchalar moylanadigan qismlarning xizmat muddatini uzaytiradi va aşinani kamaytiradi.
Одобрено производителем:
LOVAT LOV-204
- Доступная фасовка
- Параметры продукта
RAVENOL Super EP-Langzeitfett — bu mineral asosli avtomobil surkovchi moy bo‘lib, litiyli sovun bilan qotirilgan va tarkibida antioksidant, korroziyaga qarshi hamda EP qo‘shimchalar mavjud. Bu qo‘shimchalar moylanadigan qismlarning xizmat muddatini uzaytiradi va aşinani kamaytiradi.
U og‘ir yuklamali aylanuvchi va sirpanma podshipniklarini moylash uchun mo‘ljallangan, shu jumladan yuqori namlik, vibratsiya va zarbali yuklama sharoitida ham. Shuningdek, shassi, g‘ildirak podshipniklari, avtomobil, qurilish, sanoat va qishloq xo‘jaligi texnikasidagi kardanning sharnirlarini moylashda ham qo‘llanilishi mumkin.
Qo‘llaniladigan harorat diapazoni: -30°C dan +130°C gacha (qisqa muddatli yuklama ostida +150°C gacha). NLGI klassi 2. Almashtirish oralig‘i uzaytirilgan.
Super EP-Langzeitfett qo‘llanilishi quyidagilarni ta’minlaydi:
- Turli texnika turlari uchun universal qo‘llanilish imkoniyati
- A’lo EP xususiyatlari va aşinaga qarshi himoya
- Nam muhitda ham oksidlanish va korroziyaga qarshi samarali himoya
- Juda yaxshi mexanik barqarorlik
- Zo‘r darajadagi suvga chidamlilik
- Uzoq xizmat muddati va natijada almashtirish intervallarining kengayishi
- Qarishga nisbatan mukammal chidamlilik
- Past haroratlarda ham yaxshi nasoslanish xususiyati
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | Mineral |
Mineral
|
||
| Ishlab chiqaruvchi tomonidan ma’qullangan | LOVAT LOV-204 |
LOVAT LOV-204
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51502 KP2K-30, ISO I6743-9: ISO-L-XCCFB2 |
DIN 51502 KP2K-30, ISO I6743-9: ISO-L-XCCFB2
|
||
| Rang | Jigarrang | ingl |
Jigarrang
ingl
|
|
| Qovushqoqlashtiruvchi modda | Litiyev sovun asosida | DIN 51757 |
Litiyev sovun asosida
DIN 51757
|
|
| NLGI-Class | 2 | DIN 51818 |
2
DIN 51818
|
|
| Mahsulotlar tasnifi | KP2K-30 | DIN 51502 |
KP2K-30
DIN 51502
|
|
| Ish harorati | °C | 0 | DIN 51825 |
0
°C
DIN 51825
|
| Ish harorati (qisqa muddatli) | °C | 130 | DIN 51757 |
130
°C
DIN 51757
|
| Penetratsiya | 60 aylanish | 265-295 | ISO 2137 |
265-295
60 aylanish
ISO 2137
|
| Korroziyadan himoya testi | namlik kamerasi | 1 | DIN 51802 |
1
namlik kamerasi
DIN 51802
|
| Tomchilash harorati | °C | 180 — | DIN ISO 2176 |
180 —
°C
DIN ISO 2176
|
| Misga korroziya testi | 120°C/24 soat | 1 | DIN 51811 |
1
120°C/24 soat
DIN 51811
|
| Suv o‘tkazmaslik (3 soat/90°C) | °C | 1-90 | DIN 51807-1 |
1-90
°C
DIN 51807-1
|
| VKA payvandlash yuklamasi | N | 2400 — 2600 | DIN 51350-4 |
2400 — 2600
N
DIN 51350-4
|
| Kinematik viskozite 40°C da | mm²/s | 130 | DIN 51659-2 |
130
mm²/s
DIN 51659-2
|
| Ruxsatnomalar | DIN 51502 KP2K-30, ISO I6743-9: ISO-L-XCCFB2, LOVAT LOV-204 |
DIN 51502 KP2K-30, ISO I6743-9: ISO-L-XCCFB2, LOVAT LOV-204
|
Для подшипников
RAVENOL Hot Red Grease HRG2 - qizil rangli avtomobil moyi bo'lib, mineral asosli moydan ishlab chiqarilgan, avtomobillar, mexanizmlar, qurilmalar, konveyer qurilmalari, qurilish texnikasi va boshqalarning sirpanish va aylanma podshipniklari uchun litiy sovuni bilan quyuqlashtirilgan, yuqori haroratlarda ishlaydigan. Oqib ketishga barqarorlik, korroziya va zangdan himoya.
Одобрено производителем:
MAN 284 Li-H2, MB-Approval 265.1
Аналоги OEM:
BMW 83190447919, Land Rover STC3435, SWAG 10921909, VAG G052133A2, VAG G052133A2
- Доступная фасовка
- Параметры продукта
RAVENOL Hot Red Grease HRG2 - qizil rangli avtomobil moyi bo'lib, mineral asosli moydan ishlab chiqarilgan, avtomobillar, mexanizmlar, qurilmalar, konveyer qurilmalari, qurilish texnikasi va boshqalarning sirpanish va aylanma podshipniklari uchun litiy sovuni bilan quyuqlashtirilgan, yuqori haroratlarda ishlaydigan. Oqib ketishga barqarorlik, korroziya va zangdan himoya.
RAVENOL Hot Red Grease HRG2 sanoatda va avtomobillar uchun universal moy sifatida ishlatilishi mumkin.
Ayniqsa yuk avtomobillarining podshipniklarini va yuqori aylanish tezligidagi podshipniklarni moylash uchun mos keladi.
Hot Red Grease HRG2 dan foydalanish quyidagilarni ta'minlaydi:
- Foydalanishning universalligi
- Eskirishdan himoya
- Mexanik va kimyoviy barqarorlik
- Korroziyadan himoya
- Metall yuzalarga mukammal yopishish
- Oksidlanish va qarishga chidamlilik
- Past haroratlarda ham yaxshi haydalish qobiliyati
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Brand | RAVENOL |
RAVENOL
|
||
| Ishlab chiqaruvchi tomonidan ma’qullangan | MAN 284 Li-H2, MB-Approval 265.1 |
MAN 284 Li-H2, MB-Approval 265.1
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51502 KP2P-35, ISO 6743-9: ISO-L-XCEEB2 |
DIN 51502 KP2P-35, ISO 6743-9: ISO-L-XCEEB2
|
||
| Rang | Qizil | ingl |
Qizil
ingl
|
|
| Qovushqoqlashtiruvchi modda | Litiyev sovun asosida | DIN 51757 |
Litiyev sovun asosida
DIN 51757
|
|
| NLGI-Class | 2 | DIN 51818 |
2
DIN 51818
|
|
| Mahsulotlar tasnifi | KP2P-35 | DIN 51502 |
KP2P-35
DIN 51502
|
|
| Ish harorati | °C | 0 | DIN 51825 |
0
°C
DIN 51825
|
| Ish harorati (qisqa muddatli) | °C | 200 | DIN 51757 |
200
°C
DIN 51757
|
| Penetratsiya | 60 aylanish | 265-295 | ISO 2137 |
265-295
60 aylanish
ISO 2137
|
| Tomchilash harorati | °C | 260 — | DIN ISO 2176 |
260 —
°C
DIN ISO 2176
|
| Misga korroziya testi | 120°C/24 soat | 1 | DIN 51811 |
1
120°C/24 soat
DIN 51811
|
| Suv o‘tkazmaslik (3 soat/90°C) | °C | 1-90 | DIN 51807-1 |
1-90
°C
DIN 51807-1
|
| VKA payvandlash yuklamasi | N | 2600 — 2800 | DIN 51350-4 |
2600 — 2800
N
DIN 51350-4
|
| Kinematik viskozite 40°C da | mm²/s | 140 | DIN 51659-2 |
140
mm²/s
DIN 51659-2
|
| Ruxsatnomalar | DIN 51502 KP2P-35, ISO 6743-9: ISO-L-XCEEB2, MAN 284 Li-H2, MB 265.1 |
DIN 51502 KP2P-35, ISO 6743-9: ISO-L-XCEEB2, MAN 284 Li-H2, MB 265.1
|
Для подшипников
RAVENOL Arctic Green Grease AGG 2 - to‘liq sintetik, sintetik komponentlar (esterlar) asosida maxsus ishlab chiqilgan, mineral moy qo‘shilgan, zagustiteli litiy sovuniga asoslangan surkov moyidir.
- Доступная фасовка
- Параметры продукта
Объем:
1 kg
Артикул:
1340126-001
Объем:
25 kg
Артикул:
1340126-025
Объем:
180 kg
Артикул:
1340126-180
Объем:
200 g
Артикул:
1340126-200
RAVENOL Arctic Green Grease AGG 2 - to‘liq sintetik, sintetik komponentlar (esterlar) asosida maxsus ishlab chiqilgan, mineral moy qo‘shilgan, zagustiteli litiy sovuniga asoslangan surkov moyidir.
RAVENOL Arctic Green Grease AGG 2 silliq surilishga chidamlilik (mexanik barqarorlik), korroziya va zangga qarshi mukammal himoyani ta’minlaydi. U aylanuvchi va sirpanma podshipniklarni juda yuqori yuklama va juda past haroratlarda moylash uchun qo‘llaniladi. Maxsus qo‘shimchalar kompleksi tufayli doimiy foydalanishda yeyilish kamayadi va moylanayotgan mexanizmlarning xizmat muddati uzaytiriladi.
Uzluksiz ishlash rejimida RAVENOL Arctic Green Grease AGG 2 ning yuqori ish harorati +120 °C ni tashkil etadi. Qisqa muddatli ishlashda 160 °C dan oshirilishi tavsiya etilmaydi.
Yuqori haroratda qo‘llanilishi mahsulotning xizmat muddatini qisqartiradi. Surkov moyini muntazam qo‘shib borish uning xususiyatlarini saqlab qoladi va ekspluatatsion xarajatlarni kamaytiradi.
Qo‘llanilishi Arctic Green Grease AGG 2 quyidagilarni ta’minlaydi:
- Uzluksiz silliq surilishga chidamlilik
- Oksidlanishga chidamlilik
- Suv bilan yuvilib ketishga chidamlilik
- Yaxshi eskirishdan himoya
- Ekstremal haroratda yaxshi yuk ko‘tarish qobiliyati
- Yuqori bosim ostida ishlashga juda yuqori moslashuvchanlik
- Yaxshi yopishuvchanlik xususiyati
| Параметр | Ед. изм | Значение | Тестирование | |
|---|---|---|---|---|
| Brand | RAVENOL |
RAVENOL
|
||
| Turi | To‘liq sintetik |
To‘liq sintetik
|
||
| Spetsifikatsiyalarga mos keladi | DIN 51502 KPE2K-60, ISO 6743-9: ISO-L-XECEB2 |
DIN 51502 KPE2K-60, ISO 6743-9: ISO-L-XECEB2
|
||
| Rang | Yashil | ingl |
Yashil
ingl
|
|
| Qovushqoqlashtiruvchi modda | Litiyev sovun asosida | DIN 51757 |
Litiyev sovun asosida
DIN 51757
|
|
| NLGI-Class | 2 | DIN 51818 |
2
DIN 51818
|
|
| Mahsulotlar tasnifi | KPE2K-60 | DIN 51502 |
KPE2K-60
DIN 51502
|
|
| Ish harorati | °C | 0 | DIN 51825 |
0
°C
DIN 51825
|
| Ish harorati (qisqa muddatli) | °C | 160 | DIN 51757 |
160
°C
DIN 51757
|
| Penetratsiya | 60 aylanish | 265-295 | ISO 2137 |
265-295
60 aylanish
ISO 2137
|
| Tomchilash harorati | °C | 180 — | DIN ISO 2176 |
180 —
°C
DIN ISO 2176
|
| Misga korroziya testi | 120°C/24 soat | 1 | DIN 51811 |
1
120°C/24 soat
DIN 51811
|
| Suv o‘tkazmaslik (3 soat/90°C) | °C | 1-90 | DIN 51807-1 |
1-90
°C
DIN 51807-1
|
| VKA payvandlash yuklamasi | N | 3000 — 3200 | DIN 51350-4 |
3000 — 3200
N
DIN 51350-4
|
| Kinematik viskozite 40°C da | mm²/s | 20 | DIN 51659-2 |
20
mm²/s
DIN 51659-2
|
| Ruxsatnomalar | DIN 51502 KPE2K-60, ISO 6743-9: ISO-L-XECEB2 |
DIN 51502 KPE2K-60, ISO 6743-9: ISO-L-XECEB2
|